Chimney Liner & Rebuild Cost in Colorado Springs - You See the Footage Before You Get a Price

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (844) 560-6330

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
How Much Does Chimney Liner & Rebuild Cost in Colorado Springs, CO? (2026 Price Guide) | Olympus Chimney Sweep
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate
Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Chimney Liner & Rebuild Cost in Colorado Springs?

A chimney liner installation in Colorado Springs typically runs $2,400 to $6,800 depending on flue size, liner material, and whether the chimney needs crown or masonry work. A partial rebuild of the crown and upper masonry usually falls between $1,200 and $4,500, while a full chimney rebuild can reach $8,000 to $20,000. Most Colorado Springs homeowners we work with land somewhere in the $2,500 to $5,000 range for a liner and the repair work that comes with it.

Those numbers are estimates. The written estimate you receive sets the final price, and every estimate we provide is free.

Key Takeaways

  • Stainless liner installs in Colorado Springs: roughly $2,400 to $6,800 for most residential flues.
  • Crown rebuilds and upper masonry repair: about $1,200 to $4,500.
  • Full chimney rebuilds: $8,000 to $20,000, driven mostly by height and accessibility.
  • HeatShield flue resurfacing often costs far less than a full reline when the flue is still structurally sound.
  • Our technicians have up to 13 years of experience, and findings from an inspection can be repaired on the same call.

Chimney Liner & Rebuild Cost Breakdown (2026)

Here’s how the numbers break down for the Colorado Springs market. These are typical ranges, not quotes. A written estimate after inspection is the only way to know your actual price.

Work Item Typical Range Notes
Inspection (to scope the work) Free with repair estimate Diagnostic assessment of liner, crown, damper, and venting
Stainless steel flexible liner (DuraFlex), standard flue $2,400 – $4,800 Single-appliance flue, standard height
Stainless liner, oversized or tall flue $4,500 – $6,800 Larger diameter, extra length, insulation wrap
HeatShield flue resurfacing $1,800 – $4,200 Restores a sound-but-deteriorated flue without full reline
Crown rebuild $1,200 – $2,800 New crown with proper slope and overhang
Upper masonry repair (spalling brick, mortar joints) $1,800 – $4,500 Scaffolding or ladder access can move this
Full chimney rebuild above roofline $8,000 – $20,000 Height, access, and material choice drive the spread
New Gelco cap $350 – $900 Protects the flue from rain, snow, and animals
Damper repair or replacement $400 – $1,100 Depends on top-mount vs. throat-mount

What pushes a project toward the top of these ranges? Flue length, flue diameter, and whether the old liner needs to come out first. An unlined flue from an older home takes more prep than one that already has a liner that’s failing. Crown work goes up when the chimney sits high above the roofline or on a steep pitch, because scaffolding and careful staging take time. Material choice matters too, and we work with DuraFlex, HeatShield, Gelco, Famco, Olympia Chimney, and Copperfield because those product lines hold up to the freeze-thaw cycle we get here. On the lower end, a straightforward liner swap in an accessible chimney with a sound crown stays in the $2,400 to $3,500 band.

What Affects Chimney Liner & Rebuild Pricing in Colorado Springs

Colorado Springs sits at the foot of Pikes Peak, and that geography shapes chimney work in ways that matter to your bill. Here’s what moves the number up or down.

  • Freeze-thaw cycling. We go from warm afternoons to hard overnight freezes through winter, and masonry expands and contracts with each swing. Crowns crack, mortar joints open, and spalling brick shows up sooner here than in milder climates. A crown that would last decades on the coast can need rebuilding much sooner on the north side of Colorado Springs.
  • Pikes Peak wind and prevailing gusts. Wind-driven rain and snow push against the chimney and test the cap and crown. A well-fitted Gelco cap rated for the wind load protects the flue and keeps water out, and that’s cheaper than repairing water damage inside the chase later.
  • Home age and original construction. Neighborhoods like Old Colorado City, Manitou Springs, and the older blocks near downtown Colorado Springs have chimneys built under earlier codes, many with unlined or clay-tile flues. Those often need a full stainless liner and sometimes HeatShield resurfacing before a liner will sit properly.
  • Flue size and appliance type. A wood-burning fireplace insert or a gas appliance needs the correct liner diameter for safe draft and venting. Getting the sizing wrong means the appliance runs poorly and the flue fouls faster, so we size to the appliance rather than the existing opening.
  • Roof pitch and access. Steep roof pitches, tall chimneys, and tight side yards on the west side of Colorado Springs require staging that adds labor. A chimney that’s easy to reach stays toward the low end.
  • Clay tile condition. Cracked or missing clay tiles have to be addressed before a liner goes in. Sometimes HeatShield resurfacing solves it; other times the flue needs a full DuraFlex liner. The inspection tells us which.

Liner Repair vs. Rebuild: Which Is Cheaper?

Resurfacing or relining is almost always cheaper than a rebuild, and it’s the right call when the flue is structurally sound. HeatShield resurfacing restores a deteriorated flue at a fraction of a rebuild’s cost, and a DuraFlex liner addresses a damaged or undersized flue with a permanent solution rather than a patch. A full rebuild only makes sense when the masonry itself has failed – badly spalled brick, a collapsed crown, or a chimney pulling away from the house.

That’s why the inspection comes first, and why we do it as a diagnostic assessment rather than a quick visual check. We look at structural integrity, venting performance, and the condition of the crown and tile, then explain what actually needs doing. Because we handle cleaning, inspection, and repair under one roof, a problem found during the inspection can often be fixed on the same call instead of being referred out and scheduled separately. That saves you the second trip and the second contractor. You can read more about how we approach the work on our Olympus Chimney Sweep page.

How to Save on Chimney Liner & Rebuild

Chimney work isn’t the place to chase the cheapest bid, but there are real ways to keep the cost where it belongs.

  • Get the inspection before water gets in. A cracked crown repaired early costs far less than the masonry repair it becomes after a couple of freeze-thaw seasons in Colorado Springs. Catching it at the inspection stage is the single biggest lever on your total bill.
  • Address the crown when you address the liner. If you’re already paying for the chimney to be accessed, folding a crown rebuild into that visit usually costs less than booking it as a standalone job later.
  • Ask whether HeatShield fits your flue. If the tile is deteriorated but the structure is sound, resurfacing may work where a full reline would otherwise be quoted. That’s a real savings when it’s the right call, and we’ll tell you plainly when it isn’t.
  • Choose the right liner the first time. A properly sized DuraFlex liner vents the appliance correctly and lasts. A too-small or poorly fitted liner means a do-over, and do-overs cost more than doing it once.
  • Get a free written estimate and compare line items. We give you the estimate at no charge, itemized so you can see what’s driving the price. Call (844) 560-6330 to schedule yours.

Do You Need a Chimney Liner or a Rebuild?

If the flue has no liner or a damaged one, you need a liner. If the masonry or crown has failed, you may need a rebuild. The two often overlap, and the inspection is what separates one from the other. A chimney with sound brick and a sound crown but a compromised flue is a liner job. A chimney with spalling brick above the roofline and a collapsed crown is a rebuild. Getting that diagnosis right the first time is what keeps you from paying for work you didn’t need – or skipping work that protects the house.

Why Choose Olympus Chimney Sweep for Your Liner or Rebuild

We handle the full chimney service lifecycle: cleaning, inspection, and repair. That means when the inspection turns up a failing liner or a cracked crown, you don’t have to go find a second contractor. We assess it and we fix it. Our technicians have up to 13 years of experience, and we work with product lines used by certified chimney technicians across the industry – DuraFlex, HeatShield, Gelco, Famco, Olympia Chimney, and Copperfield – because the material matters as much as the labor on a job that has to stand up to Colorado Springs weather.

The name Olympus is a standard we hold ourselves to in the materials we use and the scope of work we take on, not just in the words on this page. If you’re in Colorado Springs, we can look at your chimney and give you a clear, written estimate at no charge.

FAQs – Chimney Liner & Rebuild Cost

How much does a chimney liner cost in Colorado Springs?

A chimney liner in Colorado Springs typically costs $2,400 to $6,800, with most standard residential flues landing around $2,400 to $4,800. Taller or oversized flues, insulation wrap, and removal of an old liner push the price toward the top of the range. Call (844) 560-6330 for an exact quote – estimates are free.

Is it cheaper to repair or rebuild a chimney?

Repair is cheaper than a rebuild in most cases. HeatShield resurfacing or a DuraFlex liner runs $1,800 to $6,800, while a full rebuild runs $8,000 to $20,000. A rebuild is only necessary when the masonry itself has failed, which the inspection will confirm. Call (844) 560-6330 and we’ll tell you which one you actually need.

How much does a chimney crown rebuild cost in Colorado Springs?

A chimney crown rebuild in Colorado Springs typically costs $1,200 to $2,800. Crowns crack faster here because of the freeze-thaw cycle, so addressing a cracked crown early usually costs less than the masonry repair it becomes later. Call (844) 560-6330 for a free estimate.

Can you install a liner and rebuild the crown in the same visit?

Often, yes. Because we handle cleaning, inspection, and repair under one roof, findings from the inspection can be addressed on the same call when the scope allows. We’ll confirm what’s realistic for your chimney after the inspection. Call (844) 560-6330 to schedule.

Do you offer free estimates on chimney liner and rebuild work?

Yes. Every estimate is free and itemized, so you can see exactly what’s driving the price. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, with same-day service available. Call (844) 560-6330 to get started.

Get Your Free Chimney Liner or Rebuild Estimate

Whether your flue needs a liner, your crown needs rebuilding, or you’re not sure which, the inspection tells us the answer and the free written estimate tells you the price. Call Olympus Chimney Sweep at (844) 560-6330. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday, so a call that comes in then gets booked into the next opening. We look forward to helping you get your chimney back to a standard that lasts through Colorado Springs winters.

Pricing reflects the Colorado Springs market as of 2026. Olympus Chimney Sweep offers free estimates – call (844) 560-6330.

Written by the team at Olympus Chimney Sweep.

What Our Customers Say

★★★★★ 4.8 from 11+ reviews

"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."

- Danika Whitfield

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

- Carrie Norris

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

- Ruben Rodriguez
Need Chimney Cleaning help in Colorado Springs? Licensed & insured · free written estimates
Call (844) 560-6330

Request a Free Estimate

Tell us what's going on in Colorado Springs. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7