Chimney Repair in Colorado Springs, CO | Olympus Chimney Sweep

Chimney Repair in Colorado Springs - You See the Footage Before You Get a Price

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Repair Across Colorado Springs

If your chimney crown is cracked, your flashing is leaking, or a hail storm took out your cap, you’re in the right place. We handle chimney repair in Colorado Springs with an eye on exactly what this city’s weather does to masonry: wind, hail, intense UV, and freeze-thaw cycles that open mortar joints season after season. Our technicians have up to 13 years of experience, and we work with industry-respected product lines like HeatShield and Gelco. Found during inspection, fixed on the same call. Call (844) 560-6330. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Call (844) 560-6330

Why Colorado Springs Homeowners Call Olympus Chimney Sweep for Chimney Repair

Local expertise matters more on a chimney than almost anywhere else on a house, because the failure modes here are specific. Original brick chimneys in older neighborhoods take a beating from altitude UV and repeated freeze-thaw, and factory-built metal fireplaces in the newer subdivisions up north need different tools and inspection protocols. We know which is which before we arrive.

We work with a defined set of professional-grade brands used across the trade, which means repair depth beyond a brush and vacuum. A compromised crown, a spalled flue, a failed flashing detail: those get diagnosed and addressed by the same company that sweeps and inspects, so you’re not sourcing a second contractor for every problem the inspection turns up.

For Colorado Springs, response is straightforward. Estimates are free, the price is set per job by the written estimate, and when you call we’ll book you into the next opening. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Crown Repair in Colorado Springs

Chimney Crown Repair in Colorado Springs is usually the first repair a storm-damaged chimney needs, because the crown is the flat concrete or mortar top that sheds water away from the flue and masonry below it. Hairline cracks after a freeze-thaw winter turn into water channels, and water finding its way behind the masonry is what eventually causes spalling brick and interior stains. A typical crown repair in Colorado Springs runs $275 to $650 depending on whether it’s a simple reseal or a full crown rebuild. When the crown has failed and water has already worked into the brick, resurfacing with HeatShield restores the flue and masonry face rather than patching over the problem.

Crown Cracks After Freeze-Thaw Cycles

Crowns fail faster here than at lower elevations. Water sits in a hairline crack, freezes overnight, expands, and widens the crack by morning; repeated through a Colorado Springs winter, that cycle is what turns a cosmetic crack into a structural one. A proper repair removes the failed material and rebuilds the slope so water sheds away from the flue entirely.

Temporary Seals Versus a Real Fix

A tube of masonry caulk over a crown crack buys a season at best. The right approach matches the repair to the condition: resealing a sound crown that has only surface checking, rebuilding one that’s lost its slope, or replacing a crown that has separated from the flue. We inspect first, then write the scope and the price.

Chimney Repair Companies in Colorado Springs

Choosing among Chimney Repair Companies in Colorado Springs comes down to whether the company can both diagnose and fix what it finds. Our scope covers sweep, inspection, and repair under one roof, so a cracked crown, a displaced cap, and failed flashing get resolved on the same visit rather than referred out. Typical repair work in this market runs $200 for a minor flashing reseal up to $2,500 or more for a partial rebuild, with most jobs landing in the $350 to $850 range. Nothing is recommended without camera evidence you can see for yourself.

What a Level 2 Inspection Reveals

Storm damage often hides. A Level 2 inspection uses a camera to look inside the flue, checks the crown and cap from the roof, and walks the flashing detail at the roofline where water gets in. That’s how a ceiling stain gets traced back to a failed flashing seal rather than guessed at.

Why Full-Service Scope Matters

When the sweep, the inspection, and the repair are all the same company, there’s no gap where a problem gets found and then sits waiting on a second contractor. It also means the person assessing the flue is accountable for the repair, which keeps the recommendation honest.

Trusted Brands We Service in Colorado Springs

We work with a defined portfolio of professional-grade product lines trusted by certified chimney technicians across the industry: HeatShield for flue resurfacing and restoration, Gelco caps to replace wind-displaced or hail-damaged tops, Olympia Chimney components, and Famco venting. We don’t claim to stock parts; we source what the job calls for and turn it around as quickly as the scope allows. If your chimney needs a cap that stays put through a Colorado Springs wind event, or a flue restored rather than patched, that’s the kind of work these materials are made for.

Common Chimney Repair Problems We See in Colorado Springs Homes

  • Freeze-thaw damage to crowns and mortar joints. Water gets into a crack, freezes, and widens it a little more each winter. Over several seasons that’s what produces spalling brick and visible mortar loss on the chimney face.
  • Displaced caps and failed flashing after high-wind events. A spring wind or summer thunderstorm can shift a cap or tear a flashing seal, letting water run behind the exterior. It often shows up first as a ceiling stain near the chimney rather than at the chimney itself.
  • Hail-cracked clay tile flue liners. Summer hail and thunderstorms crack the clay tiles inside older brick flues. A cracked liner needs repair before the first fire of the season, because combustion gases and heat can reach the surrounding structure through it.
  • Creosote buildup faster than at lower elevations. Thinner air above 6,000 feet changes how wood burns and how the chimney drafts, so creosote accumulates more quickly and unevenly. Older brick homes with clay tile flues are the most vulnerable to it.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Chimney Repair in Colorado Springs, CO

Estimates are free, and the written estimate sets the final price. Typical repair ranges in this market: a flashing reseal runs roughly $200 to $400, chimney crown repair or rebuild $275 to $650, mortar repointing and tuckpointing $300 to $900 depending on the run of joints, chimney waterproofing $250 to $500, and a partial rebuild $1,500 to $3,500. What moves the number is access, the height of the chimney, how much masonry has failed, and whether the flue needs relining with DuraFlex. Minor repairs that can safely wait are worth knowing about too: we’ll tell you plainly when a fix can hold until next season.

We Also Serve Cities Near Colorado Springs

We serve homeowners across the region around Colorado Springs, including Cimarron Hills, Stratmoor, Security-Widefield, and Manitou Springs. The same storm exposure that damages chimneys in the city moves across the surrounding communities, and the work is the same: inspect, diagnose, and repair before the first fire of the season. Call us to book.

Serving Colorado Springs, CO – Our Local Coverage Area

We serve Colorado Springs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Repair in Colorado Springs

Book Your Chimney Repair in Colorado Springs

If a storm left you with a cracked crown, a shifted cap, or a stain on the ceiling, don’t wait for the first fire of the season to find out what’s wrong. We assess structural integrity and venting performance, then fix what we find under one roof. Call Olympus Chimney Sweep at (844) 560-6330 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Learn more about our full chimney repair services.

Written by the team at Olympus Chimney Sweep.

Why Colorado Springs Chooses Olympus Chimney Sweep

We set the standard for chimney repair in Colorado Springs.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Colorado Springs

Getting your chimney repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Colorado Springs Customers Say

Trusted by homeowners across Colorado Springs and surrounding areas.

★★★★★

"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."

Danika Whitfield
★★★★★

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

Carrie Norris
★★★★★

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

Ruben Rodriguez

Ready for Chimney Repair in Colorado Springs?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Colorado Springs.

(844) 560-6330

Request a Free Estimate in Colorado Springs

Tell us about your chimney repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - We Answer 24/7