Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Stratmoor
If wind tore the cap off your flue or water is staining the firebox after a spring snow, you’re in the right place. We handle chimney repair in Stratmoor for the ranches and split-levels tucked against Cheyenne Mountain, where downdrafts and heavy seasonal burning wear chimneys harder than most of the Front Range. Our technicians have up to 13 years of experience, and we work with professional-grade liner and resurfacing products so a problem found on inspection gets fixed, not referred out. Call (844) 560-6330. We answer 24/7, with fast dispatch from 7am to 7pm.
Why Stratmoor Homeowners Call Olympus Chimney Sweep for Chimney Repair
Stratmoor sits in the 80902 ZIP at the foot of Cheyenne Mountain, and that geography shapes nearly every repair call we book here. The downslope winds that funnel off the mountain are strong enough to rock a chimney cap loose or strip a top-sealing damper right off, so a Stratmoor repair visit often starts at the top of the stack, not inside the firebox. Homeowners here also run wood-burning inserts as real heat, which means the flue sees harder, longer service than a decorative fireplace in a newer subdivision.
We treat Stratmoor as repair territory, not just a sweep route. That means a technician arrives able to diagnose crown cracks, pulled flashing, a cracked liner, or a draft problem, and to move straight into the fix using HeatShield resurfacing or a DuraFlex liner where the flue calls for it. One company, one visit, no gap between the inspection and the repair. Stratmoor property managers and the military renters and owners near Fort Carson depend on that, because a documented, inspection-ready condition report is often part of a sale or a turnover.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Flashing Repair in Stratmoor
Chimney Flashing Repair in Stratmoor usually comes up after a wind event, when the metal that seals your chimney to the roof has pulled, lifted, or rusted through and water starts finding its way into the flue and the ceiling below. The job means resetting the flashing into the masonry and the roof deck, sealing the seams, and confirming the top-sealing damper still sits tight. When a Stratmoor homeowner needs it, they usually see a damp stain, a rust streak on the firebox, or daylight where flashing should meet shingle. A typical flashing repair in Stratmoor runs about $350 to $900, depending on access and how much of the existing flashing can be reused. The written estimate sets the final price.
What a Flashing Inspection Covers
We check the joint where the roof meets the chimney on all four sides, look for lifted or torn metal, and test for gaps that let snowmelt in. The waterproofing around the cap and the top seal gets the same look. If the flashing is sound but the leak is coming from the crown, we’ll tell you that and price the right fix.
When Flashing Needs Replacing, Not Sealing
Rusted-through flashing or metal that’s lost its shape won’t seal for long, no matter how much sealant goes on it. That’s when we replace the flashing to match the roof material and the chimney’s footprint. It’s a small repair that prevents a much larger one inside the flue.
Chimney Crown Repair in Stratmoor
Chimney Crown Repair in Stratmoor is one of the most common jobs we take on, because the crown, the concrete or masonry cap at the top of the stack, is the first thing the wind and freeze-thaw cycle attack. A cracked or spalling crown lets water down into the flue and the smoke chamber, and here it tends to show up on the older ranches that sit exposed to the mountain wind. Repair means removing the failed crown material, rebuilding a proper slope so water runs off, and sealing it. A typical crown repair in Stratmoor runs about $400 to $1,200. When the crown is beyond patching, HeatShield resurfacing can restore the flue and crown surface rather than rebuild the whole stack, and the written estimate sets the final cost.
How to Spot a Failing Crown
Look for chunks of concrete on the roof or in the firebox, a visible crack where the crown meets the flue, or a crown that’s flaking apart. Water getting past it often shows up as a damp smoke chamber or a rusty damper. None of that is a job to test by climbing up yourself; a trained technician has the right equipment and knows what a structural problem looks like.
Rebuilding vs. Resurfacing a Crown
If the crown is cracked but the masonry below is sound, resurfacing with HeatShield restores the surface and seals it. If the crown has separated from the flue or the brick is spalling badly, a rebuild is the honest answer. We tell you which, based on what we can show you with a camera.
Trusted Brands We Service in Stratmoor
We work with product lines that certified chimney technicians rely on nationwide: DuraFlex liner systems for damaged or undersized flues, HeatShield for chimney resurfacing and flue restoration, and Gelco caps and Olympia Chimney components where a new cap or venting part is the right fix. We don’t claim to stock parts on a truck, but we work with these professional-grade products and can source what your Stratmoor repair needs with a fast turnaround. That’s what lets us handle a crown, a liner, and a cap in the same visit instead of sending you to shop for parts. When a repair calls for a specific component, these are the names you’ll see in the estimate.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Stratmoor Homes
- Wind-driven downdrafts and reverse draft. The downslope winds off Cheyenne Mountain push air back down the flue, and a wood insert run as primary heat then smokes into the room and builds creosote unevenly. A cap or top-sealing damper sized for the exposure usually settles it.
- Missing or loosened caps after a windstorm. This is the single most frequent reason a Stratmoor homeowner calls us. A blown-off cap opens the flue to rain, snow, squirrels, and birds, and the next thing you know the damper is rusted and the smoke chamber is a mess.
- Older flues without modern liners. Much of Stratmoor’s housing is mid-century and 1970s-80s ranch and split-level, and plenty of those chimneys were built before liners were standard. A Level 2 camera inspection is the only way to know whether the flue is sound, and it’s routine here.
- Cracked crowns and pulled flashing from freeze-thaw. Cold winters and heavy spring snows work on the top of the stack, and a wind event finishes the job. Water past the crown or flashing is what starts the damage inside.
Pricing for Chimney Repair in Stratmoor, CO
We give real ranges because we’d rather you know roughly what a repair costs before you call. Chimney flashing repair in Stratmoor typically runs $350 to $900, and crown repair runs $400 to $1,200 depending on whether we resurface or rebuild. Mortar repointing and tuckpointing on Stratmoor’s older masonry usually falls between $300 and $1,000, waterproofing runs about $250 to $600, and a DuraFlex liner installation, when the flue needs one, runs roughly $2,000 to $4,500 depending on length and flue size. What moves the number is access, roof pitch, how far the damage has spread, and whether the crown or flashing can be repaired rather than replaced. Nothing gets recommended without camera evidence you can see for yourself, and if a repair can safely wait, we’ll say so. The estimate is free, and the written estimate sets the final price. Call (844) 560-6330 for an exact quote.
We Also Serve Cities Near Stratmoor
We take chimney repair calls throughout the south Colorado Springs area, including Security-Widefield, Colorado Springs, Fort Carson, and Fountain. If you’re in one of those communities and need a repair or an inspection, we can help. For a full look at what we do, see our Chimney Repair services, and for the town itself see Stratmoor.
Serving Stratmoor, CO – Our Local Coverage Area
We serve Stratmoor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Stratmoor
Because a wood stove or insert run as primary heat burns hard and often, and Stratmoor’s wind-driven downdrafts reverse the draft and push smoke back down the flue, so creosote deposits faster and less evenly. A decorative fireplace that gets used a handful of times a season simply loads the flue more slowly. For a stove in heavy service, a shorter sweeping interval and a camera check each season keeps the flue safe. Call (844) 560-6330 for an exact quote on a sweep and inspection, estimates are free.
Once a year, and more often if the insert is your main heat source, is the standard we recommend for Stratmoor’s inserts. The wind exposure and heavy seasonal burning here load creosote faster than a milder, calmer setting would. A yearly inspection catches a cracked liner or a loosened cap before it turns into a bigger repair. Call (844) 560-6330 to book one, and we’ll tell you what we find.
Usually not. A blown-off cap is often a re-secure or replace job, and a qualified technician will check the flue for water intrusion and animal entry first. What matters is getting the cap back on quickly so rain and pests don’t get into the flue and rust the damper. If the storm also cracked the crown or pulled the flashing, that’s a separate fix priced on its own. Call (844) 560-6330 for a free estimate.
The crown is the cap at the top of the stack that sheds water off the flue, while the flashing is the metal that seals the chimney to the roof. A crown repair rebuilds or resurfaces the top; a flashing repair resets or replaces the metal joint. Both fail after wind and freeze-thaw, and both let water into the chimney, but they’re different jobs. A technician inspects both on the same visit and only recommends the one your chimney actually needs. Call (844) 560-6330 for a free estimate.
Often, yes. A cracked or non-compliant flue in an older Stratmoor ranch can frequently be relined with a DuraFlex liner system or restored with HeatShield resurfacing, which is far less invasive than tearing down and rebuilding the stack. The right answer depends on what a camera inspection shows. We don’t recommend a rebuild unless the masonry itself is failing. Call (844) 560-6330 for a free estimate and we’ll show you what we find.
Written by the team at Olympus Chimney Sweep.