Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in Security-Widefield, CO
We provide independent HeatShield service across Security-Widefield, and the one thing that sets our work apart here is that we treat cast-in-place liner material as engineered product, not generic patching cement. Security-Widefield’s original clay-tile flues and its direct exposure to plains wind decide whether resurfacing holds or fails. Call (844) 560-6330. We answer 24/7, with fast dispatch from 7am to 7pm.
HeatShield is a flue resurfacing product with specific mixing, curing and application requirements. Our technicians have up to 13 years of experience and work with these systems routinely while staying fully independent of the manufacturer. That independence means honest advice about whether relining is actually necessary, or whether cleaning and repair will do. We’re an independent service provider, not manufacturer-affiliated or authorized. Cleaning, inspection and repair all happen under our roof, so a problem found during inspection can be addressed on the same visit.
Why Security-Widefield Residents Choose Us for HeatShield Service
Most sweep-only operations can brush a flue and hand you a referral. That gap is where Security-Widefield homeowners get stuck, because the housing stock here is dominated by mid-century ranches and split-levels with original masonry fireplaces, and original masonry raises questions a brush can’t answer. We work with a defined set of professional-grade product lines, including DuraFlex liner systems, HeatShield resurfacing, Gelco caps, Famco venting components and Copperfield supply-grade materials. That scope means we can tell you what your flue actually needs and then do the work.
An HeatShield resurfacing job also sets a high bar for the visible work: the crown has to shed water, the cap has to hold against wind, and the flue surface has to be sound enough to receive the material. We assess structural integrity and venting performance rather than glancing up the flue and calling it done. Scheduling is straightforward: we book a sweep, and you get a flat price agreed before booking.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common HeatShield Chimney Cleaning Problems We Solve in Security-Widefield
- Resurfacing over deteriorated tile. In 1950s-70s ranches, clay tile cracks and spalls with age, and HeatShield resurfacing applied over improperly prepped tile can debond and flake. We clean the tile, remove loose material and prep the cracks before any material goes in.
- Weak or chalky cured material from a bad mix. Over-thinned cast-in-place mix cures weak and sheds, exposing the flue to heat and moisture. We follow manufacturer-specified materials and mixing ratios instead of generic refractory cement.
- Freeze-thaw damage at the crown and top courses. Front Range temperature cycling opens cracks at the crown and top courses, undermining the liner’s top termination and letting water behind the resurfaced flue. Crown repair is where many of these jobs start.
- Wind-driven debris abrading a fresh liner. High-wind events push tumbleweeds, plastic bags and grit past damaged or missing caps, and that material packs against flue walls and scours a newly cast surface. After a blow, the cap is the first thing we check.
- Heavy creosote in fireplaces that see regular winter use. Dry, cold winters mean steady burning, and creosote accumulates in flues that haven’t been swept. Deposit depth has to come down before resurfacing is even an option.
HeatShield Service in Security-Widefield: What Local Conditions Mean for Your Equipment
Security-Widefield sits on the open plains east of I-25, and that position matters for cap and crown integrity. Caps here take direct wind loading that caps in the sheltered foothills neighborhoods north and west never see, so we check them as a wind-damage item, not just a water item. A cap knocked loose or a crown cracked by wind lets water and grit into the top of a cast-in-place liner, and the top termination is where a HeatShield job most often starts failing. The cold, dry winters add downdraft issues on top of that, and downdraft is usually a sign the cap or flue termination is compromised rather than a sign the liner is bad. Level 2 Inspection, creosote removal and crown repair are the three sub-services that show up most on these calls.
HeatShield Models & Products We Service in Security-Widefield
We service cast-in-place HeatShield systems across Security-Widefield: the ArmorFlex polymer-modified cement liner, the Thermix insulating liner mix, the resurfacing system for damaged clay tile flues, and HeatShield-branded stainless steel liner components used alongside cast-in-place work. Product choice follows the flue. We match stainless components to the flue’s actual dimensions rather than cutting to a nominal size, and we service these systems with quality parts that fit them.
Where the existing tile is sound and only glazed or lightly cracked, resurfacing is far cheaper than a full stainless reline. Badly spalled or displaced tile means replacement, not another coating. We say so plainly.
See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in Security-Widefield
A typical job here starts with a sweep and Level 2 Inspection, then a written estimate for whatever the inspection supports. Resurfacing costs more than cleaning, and a full reline costs more than resurfacing. The estimate is free and the final price is set by the written estimate, per job.
| Service | What it covers |
|---|---|
| Chimney sweep & Level 2 Inspection | Creosote removal, camera inspection, photo report |
| Crown repair | Rebuilding or sealing the crown so water can’t get behind the liner |
| HeatShield resurfacing | Cast-in-place restoration of sound but cracked or glazed clay tile |
| DuraFlex liner installation | Full reline when tile is displaced or badly spalled |
Call (844) 560-6330 for an exact quote. Estimates are free.
Serving Security-Widefield, CO – Our Local Coverage Area
We serve Security-Widefield and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – HeatShield Chimney Cleaning in Security-Widefield
HeatShield is a flue resurfacing product, not a coating in the paint sense: it’s a cast-in-place material applied to restore the inside surface of a clay tile flue. It’s engineered to be mixed, cured and applied to specific requirements, which is why application quality decides whether the job lasts.
The tile condition decides. A ranch home with an original clay-tile flue typically shows cracked, glazed tile and an uneven crown after a season of plains wind and freeze-thaw, and resurfacing is appropriate once the tile is cleaned, loose material removed and cracks prepped, with the crown rebuilt so water can’t get behind the new liner. If inspection finds displaced or badly spalled tile, the path shifts to a full reline rather than a coating over failing masonry.
Because of the open plains exposure east of I-25. Caps take direct wind loading, and windstorms routinely drive tumbleweeds and plastic bags into them, which is a direct result of that exposure. A damaged or missing cap lets grit and water reach the flue, so cap integrity gets checked on every visit.
It can, but the crown gets fixed as part of the job rather than after it. Water getting behind a resurfaced flue undoes the work from the top, so crown repair comes first, then resurfacing. Nothing is recommended without camera evidence you can see for yourself, and we’ll say plainly when work can safely wait.
Heavy creosote has to come out before any cast-in-place material goes in, and deposit depth tells us how urgently a sweep is needed. A compromised liner identified during inspection and relined with DuraFlex is a specific repair, not a vague warning. Call (844) 560-6330 for an exact quote. Estimates are free.
Service Areas Near Security-Widefield
We serve Security-Widefield and the surrounding communities, including Colorado Springs, Cimarron Hills, Stratmoor, Manitou Springs and the Air Force Academy area. If you’re in Security-Widefield, we can book your sweep directly. Homeowners near Fort Carson and Fountain can book the same service.
Book Your HeatShield Service in Security-Widefield Today
Call (844) 560-6330 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll book your sweep around your schedule and give you a written estimate before any work begins.
Written by the team at Olympus Chimney Sweep.