Chimney Repair in Colorado Springs, CO | Olympus Chimney Sweep

Chimney Repair in Colorado Springs - You See the Footage Before You Get a Price

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Trusted Chimney Repair for Colorado Springs Homeowners

Chimney damage in Colorado Springs rarely announces itself. A hairline crack in the crown, a liner that has flaked apart behind the damper, flashing that pulled loose after a windstorm off the Front Range – each one lets water or combustion gases go where they shouldn’t, and each one is invisible from the living room. That’s the problem chimney repair exists to solve: finding the failure before it becomes a fire risk or a masonry rebuild, then fixing it correctly the first time.

Call (844) 560-6330

Our technicians have up to 13 years of experience, and they work with the same professional-grade product lines trusted by certified chimney technicians nationwide – DuraFlex liner systems, HeatShield resurfacing, Gelco caps, and Famco venting components. Because we handle chimney sweep and inspection together with repair, a defect found during a cleaning can be addressed on the same visit instead of referred to a second contractor. Call (844) 560-6330. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Chimney Cap Installation

Chimney Cap Installation is the fitting of a protective cover over the flue opening to keep rain, snow, birds, and debris out while still allowing exhaust to escape. You need one when the flue is open to the sky, when a previous cap has rusted through, or when animals have nested in the smoke chamber. In Colorado Springs, where hailstorms and spring wind are routine, an uncapped flue takes a beating. We install Gelco and Olympia Chimney caps sized to the actual flue, sealed to the crown so water can’t wick underneath. A typical cap installation in Colorado Springs runs $250-$650 depending on flue count and cap style, with the written estimate setting the final price. Call (844) 560-6330 for an exact quote.

Single-Flue and Multi-Flue Caps

A single-flue cap covers one opening; a multi-flue cap spans the whole crown and protects every flue at once. Multi-flue units need correct measurement across the crown, not just the flue diameter. We size to the crown so the cap sits level and sheds water away from the masonry.

Stainless and Galvanized Options

Stainless steel holds up far better against moisture and temperature swings than galvanized steel, which can rust within a few seasons in our climate. We’ll explain the trade-off between cost and lifespan so you can choose with your budget in view. Both are available in the correct mesh for spark arrestance.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Cap Replacement

Chimney Cap Replacement is the removal of a worn, damaged, or wrongly sized cap and the fitting of a new one. It’s the right call when the existing cap is rusted, dented from hail, missing mesh, or simply too small for the flue. A failing cap lets water into the smoke chamber and invites birds and squirrels to nest, which blocks draft and creates a fire hazard. We remove the old unit, inspect the crown and flue top while we’re up there, and install a properly sized Gelco or Olympia Chimney cap with fasteners rated for the exterior. Chimney cap replacement in Colorado Springs typically costs $250-$650, with the written estimate setting the final price. Call (844) 560-6330 and we’ll give you an exact quote.

When a Cap Fails Early

Caps fail early when they’re undersized for the crown, fastened with hardware that corrodes, or installed without a seal at the base. Hail and freeze-thaw cycles accelerate the wear. We check all three before recommending a replacement.

Reusing Sound Hardware

If the cap body is sound but the mesh or fasteners have gone, we can sometimes replace the failing components rather than the whole unit. That keeps the cost down and the work honest. We’ll tell you plainly which path makes sense.

Chimney Liner Installation

Chimney Liner Installation is the fitting of a new flue liner inside an existing chimney to contain combustion gases and protect the surrounding masonry. It’s needed when the original clay tile liner is cracked, spalled, or missing joints, when the flue is undersized for the appliance, or when a new stove or insert demands a correctly rated flue. A compromised liner is a genuine safety concern: carbon monoxide and heat can reach framing through gaps in the tile. We install DuraFlex flexible liner systems sized and insulated to the appliance, with proper top plate and termination. Chimney liner installation in Colorado Springs runs $2,200-$5,800 depending on flue height, liner diameter, and whether insulation is added, with the written estimate setting the final price. Call (844) 560-6330 for an exact quote.

Why Liner Sizing Matters

An oversized flue runs cold and drafts poorly; an undersized one chokes the appliance. We calculate the correct diameter from the appliance’s venting requirements, not guesswork. The wrong size is one of the most common causes of smoke rollback and poor draft.

Insulation and Draft Performance

Wrapping the liner in insulation keeps flue gases warmer, which improves draft and reduces creosote formation. On an exterior chimney in our climate, that difference is significant. We’ll explain when insulation is worth adding.

Chimney Flashing Repair

Chimney Flashing Repair is the correction of the metal and sealant system where the chimney meets the roof, which is the single most common entry point for water. You need it when you see staining on the ceiling near the chimney, rusted or lifted flashing, cracked sealant, or daylight visible at the roof line. Left alone, a flashing leak rots sheathing and framing and works its way into the masonry. We reset or replace step flashing, counter-flashing, and the sealant at the chimney-roof joint, matching the roof material. Chimney flashing repair in Colorado Springs typically costs $300-$950 depending on roof pitch, access, and how much of the assembly needs rebuilding, with the written estimate setting the final price. Call (844) 560-6330 and we’ll give you an exact quote.

Signs of a Flashing Leak

Brown ceiling stains, rust streaks on the chimney’s exterior, and water in the firebox after rain all point to flashing. A leak can also show up as efflorescence – the white powdery staining on masonry. Catching it early usually means a straightforward repair.

Roof Pitch and Access

Steep roofs and tight clearances make flashing work more involved and require proper safety setup. We assess the pitch and access before quoting. That’s part of why the estimate is written rather than given over the phone.

Chimney Crown Repair

Chimney Crown Repair is the repair or rebuilding of the concrete cap at the very top of the chimney that sheds water away from the flue and masonry below. You need it when the crown is cracked, crumbling, or pulling away from the flue – a failure that lets water soak into the masonry and freeze. In Colorado Springs, freeze-thaw cycles are relentless, and a cracked crown is often the root cause of larger masonry damage. We repair minor cracks with a flexible sealant and rebuild badly deteriorated crowns with a proper overhang and slope. Chimney crown repair in Colorado Springs runs $400-$1,400 depending on the size and condition of the crown, with the written estimate setting the final price. Call (844) 560-6330 for an exact quote.

Minor Cracks vs. Full Rebuild

Hairline cracks can often be sealed before they widen. A crown that has separated from the flue or lost its slope needs a rebuild to perform. We evaluate the crown structurally, not just visually.

A Crown That Sheds Water

A correct crown overhangs the chimney walls and slopes away from the flue so water never pools at the joint. Many original crowns were built flat, which is exactly why they fail. A rebuild corrects that geometry.

Chimney Repair Companies

Chimney Repair Companies vary widely in what they can actually do, and that difference matters when a defect is found. Some sweep only and refer all repair work out; others subcontract the flue work. We handle sweeping, inspection, and repair as a single service, so a failed liner or cracked crown found during inspection can be addressed without a second company. That’s the practical reason to choose a repair-capable operation over a basic sweep. Our technicians have up to 13 years of experience, and we work with HeatShield resurfacing and DuraFlex liner systems – repair categories most sweep-only operations can’t offer. Chimney repair in Colorado Springs generally runs $250-$5,800 depending on scope, with the written estimate setting the final price. Call (844) 560-6330 for an exact quote.

Why a Repair Scope Matters

When the person on your roof can only sweep, your options narrow to “clean it and call someone else.” A repair-capable company can diagnose and fix in one visit. That means fewer trips, less disruption, and no gap between inspection and remediation.

Reading a Repair Proposal

A good proposal names the defect, the product or method used to fix it, and the scope of work. It shouldn’t be a one-line quote. We put the specifics in writing so you know exactly what you’re approving.

Chimney Masonry Repair

Chimney Masonry Repair is the restoration of the brickwork, mortar joints, and structure of the chimney itself. It’s needed when mortar joints are crumbling (often called spalling or missing joints), bricks are flaking, or the stack is leaning or separating from the house. In Colorado Springs, moisture from failed crowns and flashing is the usual culprit – it gets into the masonry, freezes, and pushes the brick apart over successive winters. Left unrepaired, minor joint work turns into a partial rebuild. We repoint joints, replace failed brick, and resurface flues with HeatShield where the interior is deteriorating. Chimney masonry repair in Colorado Springs typically runs $600-$4,500 depending on the extent of the work, with the written estimate setting the final price. Call (844) 560-6330 for an exact quote.

Repointing Mortar Joints

Repointing means grinding out failed mortar and packing in new material matched to the original. Done correctly, it extends the life of the brickwork for years. Done with the wrong mortar, it can damage soft brick.

HeatShield Flue Resurfacing

When the interior flue is deteriorating but the structure is sound, HeatShield resurfacing restores it without a full reline. It’s a specialized repair that addresses cracks and gaps in the flue. It’s also one of the reasons our repair scope is wider than most.

Brands We Service

We work with HeatShield resurfacing systems and know where they perform best – inside a deteriorated flue that’s still structurally sound, where a full reline isn’t yet necessary. We also install DuraFlex flexible liner systems and understand where they wear: at the top termination and at any bend in the flue. Getting those details right is what separates a liner that lasts from one that fails early.

We fit Gelco and Olympia Chimney caps sized to the actual crown, and we work with Famco venting components for appliance connections. Knowing how each product performs in cold, high-altitude conditions like ours is part of the job. Whether you have DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, or any other make, we can help. Call (844) 560-6330 to talk through what you have.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Signs You Need a Pro Right Now

  • Water staining on the ceiling or walls near the chimney. This usually points to a flashing or crown failure letting water into the structure. It won’t dry out on its own and typically gets worse with each storm.
  • Crumbling mortar or flaking brick on the exterior. Spalling brick and missing mortar mean moisture has entered the masonry. Freeze-thaw cycles widen the damage each winter, so the earlier it’s addressed, the smaller the repair.
  • A damper that won’t open fully or a firebox that smokes. This can signal a liner or flue obstruction. A blocked or damaged flue affects draft and can push combustion gases back into the room.
  • Visible cracks in the flue tile. A cracked liner lets heat and carbon monoxide reach the framing. This is a genuine safety issue that a trained technician should assess right away.
  • A chimney cap that’s missing, rusted through, or full of debris. An open flue invites water, birds, and squirrels. A quick cap replacement prevents a much larger problem downstream.

Our Process, Step by Step

  1. 1
    We talk through the symptoms first. Before anyone goes on the roof, we ask what you’re seeing – staining, smoke, draft, noise. That frames the inspection and keeps us from chasing the wrong problem.
  2. 2
    We inspect with a camera, not just eyes. A video camera inspection lets us see the full length of the flue and document the condition of the liner, joints, and smoke chamber. We photograph what we find so you can see it too.
  3. 3
    We present the findings in plain terms. You get a written explanation of what’s wrong, what it will cost, and whether the work can safely wait. Nothing is recommended without camera evidence behind it.
  4. 4
    We repair on the same visit where possible. With the product lines and skills on hand, many findings – a failed cap, a crown crack, a damaged liner section – can be corrected without a second appointment. Where a part must be ordered, we tell you the timeline up front.
  5. 5
    We leave the work documented. You receive a record of the repair and the products used, so you have it for future reference. If you ever sell the home, that record matters.

How Much Does Chimney Repair Cost in Colorado Springs?

Chimney repair in Colorado Springs spans a wide range because the scope varies so much. A typical chimney cap installation runs $250-$650 depending on flue count and cap style. Chimney flashing repair usually costs $300-$950 depending on roof pitch and access. Chimney crown repair runs $400-$1,400 depending on the condition of the crown. Chimney masonry repair typically runs $600-$4,500 depending on how much brick and mortar needs restoring. Chimney liner installation is the largest single job, at $2,200-$5,800 depending on flue height, liner diameter, and insulation.

What affects the price most is the extent of the underlying damage. A hairline crown crack is a small repair; a crown that failed and let water rot the masonry behind it is a larger one. Access matters too – a steep roof or a chimney on a tight lot takes more time and safety setup. The product chosen matters as well: a stainless cap outlasts a galvanized one, and an insulated liner performs better than an uninsulated one.

To avoid overpaying, insist on a written estimate that names the defect and the fix, and ask whether any of the work can safely wait. We don’t recommend work without camera evidence you can see. Every estimate is free, and the written estimate sets the final price. Call (844) 560-6330 for an exact quote.

Our Service Area Near Colorado Springs

We repair chimneys across the Colorado Springs area, including Cimarron Hills, Stratmoor, Manitou Springs, Security-Widefield, and the Air Force Academy area. We also work in Gleneagle, Fort Carson, Fountain, Black Forest, Monument, and Woodmoor. Drive times vary by location, and dispatch runs 7am to 7pm Sunday through Friday. For neighborhoods to the east and south, see our chimney repair in Cimarron Hills and chimney repair in Stratmoor.

Serving Colorado Springs, CO – Our Local Coverage Area

We serve Colorado Springs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About Chimney Repair in Colorado Springs

Schedule Your Chimney Repair Service in Colorado Springs Today

If you’ve seen staining, crumbling mortar, a smoking firebox, or a cap that’s seen better days, don’t wait for the next storm to make it worse. Call (844) 560-6330 for a free, no-obligation estimate. Our technicians have up to 13 years of experience, and nothing gets recommended without camera evidence you can see. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Let’s fix it right the first time.

Written by the team at Olympus Chimney Sweep.

Why Colorado Springs Chooses Olympus Chimney Sweep

We set the standard for chimney repair in Colorado Springs.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Colorado Springs

Getting your chimney repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Colorado Springs Customers Say

Trusted by homeowners across Colorado Springs and surrounding areas.

★★★★★

"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."

Danika Whitfield
★★★★★

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

Carrie Norris
★★★★★

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

Ruben Rodriguez

Ready for Chimney Repair in Colorado Springs?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Colorado Springs.

(844) 560-6330

Request a Free Estimate in Colorado Springs

Tell us about your chimney repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - We Answer 24/7