Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Monument, CO
Chimney inspection in Monument is where we start nearly every job, because a fireplace that ran hard from October through April needs a proper diagnosis before a brush ever goes up the flue. Monument sits above 7,000 feet on the Rampart Range, and the burn chemistry at this elevation leaves creosote that glazes fast and hard. Whether you’re in an older foothills cabin off the U.S. 105 corridor or a newer build in the 80132 area, we read the flue and the burn habits before we clean. Call (844) 560-6330 to book. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Monument Homes Are Different
The heating season here is long and windy. Chimneys in Monument run hot and often, and then sit through hard overnight freezes even in the shoulder months. That rapid heating and cooling is tough on masonry: it spalls brick faces and cracks clay tile liners over repeated winters. The persistent winter wind brings another problem, because down-drafts pack ash and creosote flakes against the smoke shelf and damper. Cleaning that takes pulling the damper assembly, not a top-down brush.
The housing stock splits into two worlds. Older cabins and ranchettes along the Palmer Divide were built with masonry chimneys and clay tile liners. Foothills subdivisions from the 1970s through the 1990s run wood-burning fireplaces and freestanding stoves. Newer 2000s and 2010s builds often came with factory-built metal chimneys that need manufacturer-specific brushes and inspection protocols. At 7,000 to 7,500 feet, Monument can see over 200 inches of snow in a heavy year, and the dry air makes creosote form in a brittle, flaky glaze that ignites suddenly rather than the soft soot found at lower, humid elevations. That’s why every job starts with reading the flue.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Monument Services
Most Monument homeowners call us about two things: cleaning out a hard-used flue, and fixing what the inspection turns up.
Chimney Sweep in Monument
A sweep in Monument is not a quick brush-and-vacuum job. The long burn season here loads the flue with glazed creosote that clings to the tile, and the wind-driven ash that packs into the smoke shelf has to come out by hand. We match the brush to the chimney type, which matters because the factory-built metal chimneys common in this ZIP need different tooling than older masonry flues. Before we clean, we look. If you want the full picture of what Chimney Sweep in Monument covers, that page has the detail on what we clear and what we check.

Chimney Repair in Monument
Repair in Monument usually comes down to what the freeze-thaw cycles have done. Cracked clay tile liners, spalled masonry, failed crowns and loose dampers all show up on the Palmer Divide after a hard winter. We can resurface a flue with HeatShield, reline a damaged or undersized chimney with a DuraFlex system, and fit a Gelco cap to keep weather and wildlife out. The point is that nothing found during inspection waits for a second contractor. Chimney Repair in Monument covers the scope in full.

Chimney Inspection in Monument
Chimney inspection in Monument is diagnostic work, not a glance up the flue. The mix of 1970s to 1990s foothills homes and newer factory-built chimneys in the 80132 ZIP means the right inspection depends entirely on what was built and when. The long, windy heating season here is hard on both masonry and metal, so we assess structural integrity and venting performance rather than just looking for soot. If you want to understand the levels and scope of a proper Chimney Inspection, that page explains how each level is carried out.
Fireplace Inspection
Signs you need it
You need a fireplace inspection if smoke rolls into the room instead of up the flue, if the fire has started burning sluggishly, or if you’ve had a Palmer Divide windstorm push ash and creosote flakes down against the smoke shelf and damper.
What it costs in Monument
A fireplace inspection in Monument typically runs $99 to $175, and the written estimate sets the final price.
How we do it
We pull the damper assembly where the design allows, check the firebox for cracks and the smoke shelf for packed debris, and confirm the flue is clear and sized correctly for the appliance.
Chimney Flue Inspection
Signs you need it
You need a flue inspection when the chimney has a clay tile liner that may have cracked through repeated freeze-thaw, or when a factory-built metal flue needs checking against its manufacturer’s protocol.
What it costs in Monument
A flue inspection in Monument typically runs $99 to $175, with the written estimate setting the final price.
How we do it
We run a camera down the flue to check tile integrity, measure the flue against the appliance, and document what we find so you can see it yourself.
Level 2 Chimney Inspection
Signs you need it
A Level 2 inspection is what you need after a chimney fire, a liner replacement, a change of appliance, or the sale of a Monument home, because it assesses the full flue and its connections rather than just the firebox.
What it costs in Monument
A Level 2 inspection in Monument typically runs $150 to $350, and the written estimate sets the final price.
How we do it
We use camera inspection of the entire flue, inspect the attic and roof-level components, and produce a photo report of everything we find, including any cracks or venting faults.
What Chimney Inspection Costs in Monument
These are typical ranges. What we look at determines the level, and the written estimate is what you pay.
| Item | Typical range in Monument |
|---|---|
| Fireplace inspection | $99 – $175 |
| Chimney flue inspection | $99 – $175 |
| Level 2 chimney inspection | $150 – $350 |
How often should a Monument chimney be inspected?
Once a year is the standard, and a Monument fireplace that runs hard from October through April should be checked before each heating season. A hard-used wood stove may need attention sooner.
Can a chimney fire happen without me knowing?
Yes. The brittle, flaky creosote glaze that forms at this elevation can ignite quietly. A camera inspection is often the only way to spot the damage a small fire left behind. Call (844) 560-6330 to book one; estimates are free.
Brands We Service in Monument
We work with professional-grade product lines trusted by certified chimney technicians, including HeatShield for flue resurfacing, DuraFlex liner systems, Gelco caps and Olympia Chimney components. We don’t claim stocked parts or local inventory; what we bring is matched to the job and the flue. Turnaround depends on the part and the scope. If you want to know what we work with, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Monument, CO
Here are typical ranges for the sub-jobs we handle in Monument. The written estimate you get after inspection is the final price.
| Service | Typical range in Monument |
|---|---|
| Fireplace inspection | $99 – $175 |
| Chimney flue inspection | $99 – $175 |
| Level 2 chimney inspection | $150 – $350 |
| Chimney sweep (standard cleaning) | $150 – $350 |
| Creosote removal (heavy glazed) | $250 – $600 |
| Chimney cap installation | $150 – $450 |
| Crown repair or rebuild | $300 – $1,200 |
| Chimney liner installation (DuraFlex) | $1,800 – $4,500 |
| Flue resurfacing (HeatShield) | $1,200 – $3,000 |
| Masonry repair (tuckpointing) | $400 – $1,500 |
What pushes price up in Monument is the state of the flue after a long burn season: heavy glazed creosote, cracked tile liners from freeze-thaw, and spalled masonry all add work. We give you the upfront price before anything starts, and the written estimate is the number you pay.
Neighborhoods We Serve in Monument
We work across Monument, from the foothills homes and cabins along the U.S. 105 corridor between Monument and Palmer Lake to the subdivisions that spread out toward the Palmer Divide. Older masonry chimneys and newer factory-built metal chimneys both come through our schedule, and the inspection protocol follows what the build actually has. One response-time note: scheduling across the Monument area works the same way regardless of which neighborhood you’re in, because the drive time to the foothills affects the booking, not the street.
- The U.S. 105 corridor toward Palmer Lake
- Foothills subdivisions on the Palmer Divide
- Older cabins and ranchettes near the Rampart Range
- Newer 2000s and 2010s builds in the 80132 ZIP
- Properties along the western edge of Monument
Service Area – Cities Near Monument
Monument sits in the middle of a run of foothills communities we cover, and the same high-altitude conditions apply across the neighboring towns. If you’re just outside Monument, we can schedule a visit in Woodmoor, CO, Palmer Lake, CO, Gleneagle, CO, or Black Forest, CO. The flue and burn habits change with each property, so the inspection starts from what you have. Call (844) 560-6330 for a free estimate.
Serving Monument, CO – Our Local Coverage Area
We serve Monument and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Monument
We book chimney visits across Monument on a scheduled basis, with fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday. Call (844) 560-6330 and we’ll find the next open slot; estimates are free.
Some repair work may require a permit from the local building authority, and some HOAs have rules about exterior changes like caps or masonry. We’ll tell you what we know the project needs before we start, and the written estimate sets the final price.
Yes. We serve Monument and the surrounding foothills communities, and scheduling works the same across the area. If you’re unsure whether your address falls in our coverage, call (844) 560-6330 and we’ll confirm before booking.
Olympus Chimney Sweep brings inspection, cleaning and repair together so nothing gets referred out. Our technicians have up to 13 years of experience, and we work with the product lines trusted by certified chimney technicians. Call (844) 560-6330 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Monument Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Danika Whitfield"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Carrie Norris"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Ruben Rodriguez