Chimney Repair in Fountain, CO | Olympus Chimney Sweep

Chimney Repair in Fountain - You See the Footage Before You Get a Price

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Repair Across Fountain

If your chimney is pulling poorly, your cap looks beaten up, or you’ve spotted cracked mortar on the crown, you’re in the right place. Our chimney repair team works across Fountain and the surrounding high plains, diagnosing cap and spark arrestor problems, creosote glazing, cracked crowns and failed flashing, then fixing what we find. We know this town’s wind, its older ranches and its fast-built subdivisions, and we know how differently a wood stove here behaves than a fireplace up in the city. Call (844) 560-6330 for a free estimate.

Call (844) 560-6330

Why Fountain Homeowners Call Olympus Chimney Sweep for Chimney Repair

Fountain sits on open, wind-scoured ground south of Colorado Springs, and that shapes almost every repair call we take here. Wind drives prairie grit and nesting material into caps and spark arrestors, and when a wood stove is doing real heating work through a cold snap, the flue liner loads up faster than a decorative fireplace ever will. We treat inspection as diagnostic, not cosmetic: we assess the cap, the crown, the flashing and the liner, and we tell you plainly what can wait and what shouldn’t.

What sets our work apart in Fountain is scope. We handle cleaning, inspection and repair ourselves, so a problem found during a sweep gets addressed rather than referred out. Our technicians have up to 13 years of experience, and we work with the same professional-grade product lines trusted by certified technicians nationwide, including DuraFlex liner systems, HeatShield resurfacing and Gelco caps. When a flue is damaged or undersized, we reline it properly instead of patching around it. When a crown is spalling, we restore it. That depth is why homeowners here call us back.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Cap Installation in Fountain

Chimney Cap Installation in Fountain is often the first thing a repair visit turns into, because on the open east-side lots the cap takes the brunt of the wind before anything reaches the flue. A proper installation means sizing the cap to the flue or factory-built pipe, securing it against uplift, and fitting a spark arrestor screen tight enough to keep out grit and nesting birds but open enough not to choke draft. If your cap is missing, loose or rusted, this is the fix. A typical chimney cap installation in Fountain runs $250 – $550 depending on flue size and the cap style you choose, with the written estimate setting the final price.

Sizing the Cap to the Flue

An undersized cap lets wind-driven rain and grit past the edge, and an oversized one can trap smoke. We measure the flue or pipe opening and match the cap to it rather than forcing a universal fit, which matters on factory-built fireplaces where the termination is narrower than a masonry stack.

Spark Arrestor Fit and Draft

A clogged or badly fitted arrestor is one of the most common causes of a stove that smokes back into the room. We fit a screen with the right mesh and enough open area that the cap shields the flue without cutting draft, then check the draw before we leave.

Chimney Cap Replacement in Fountain

Chimney Cap Replacement in Fountain usually comes up when the existing cap has rusted through, blown loose or packed itself solid with debris over a winter of heavy burning. Replacement means pulling the old cap and arrestor, clearing whatever grit and nesting material has collected underneath, inspecting the flue top and crown while it’s exposed, then fitting a new cap built for wind exposure. Gelco caps hold up well to this climate. A typical chimney cap replacement in Fountain runs $275 – $600, and the written estimate sets the final price.

When Replacement Beats Repair

If the cap’s frame is bent, the screen is torn or the metal has rusted thin, patching it back together rarely lasts another season of wind. Replacing the whole unit restores both the rain shield and the arrestor in one step.

What We Check While the Top Is Open

With the cap off, we can see the crown, the top of the liner and the smoke chamber from above. Cracks, loose flashing and glazed creosote are far easier to catch at that moment than from the ground later.

Trusted Brands We Service in Fountain

We work with the product lines that certified chimney technicians rely on across the industry, and we service what’s already on your roof as readily as what we install. That includes Gelco caps and Olympia Chimney components, Famco venting parts and Copperfield supply-grade materials. If your system uses one of these, we know how it’s built and how it should be maintained. We don’t claim to stock parts on a truck or keep a local warehouse; what we do is identify the right component, source it, and get back to you with a proper repair rather than a workaround. Fast turnaround matters when a stove is your heat, and we treat it that way.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Chimney Repair Problems We See in Fountain Homes

  • Wind-packed caps and spark arrestors. On windy days along the open lots, prairie grit and even bird nests pack into the cap and arrestor, choking draft before anyone looks up the flue. Clearing and replacing the cap is usually the first fix.
  • Glazed third-degree creosote in wood-stove flues. Many rural properties here burn wood as primary heat, and that load glazes the liner with creosote a brush alone won’t remove. Relining with a DuraFlex system is often the honest answer.
  • Cracked crowns and loosened flashing. Hard freezes and freeze-thaw cycles split the crown and work flashing loose, letting meltwater into the smoke chamber. Repointing and resurfacing with HeatShield restores the crown before water gets further.
  • Spalling brick on older ranch chimneys. The 1970s and 80s single-story ranches around Fountain often show face brick spalling from years of freeze-thaw and wind abrasion. Tuckpointing and waterproofing stop the decay from spreading.

Pricing for Chimney Repair in Fountain, CO

Estimates here are free and the price is set per job by the written estimate, so you know the number before we start. As a guide for Fountain’s market: mortar repointing typically runs $350 – $900 depending on how much joint work is needed; tuckpointing on spalling brick runs $400 – $1,100; chimney waterproofing runs $300 – $700; flashing repair runs $250 – $650; and a partial chimney rebuild runs $1,200 – $3,500, with full rebuilds quoted individually after inspection. Cap installation and replacement figures are above. What moves the price is access, height, how much of the crown or brick is affected, and whether the flue needs relining. Nothing gets recommended without camera evidence you can see for yourself.

We Also Serve Cities Near Fountain

Fountain sits close to a lot of the south county, and we cover the ground around it: Fort Carson, Security-Widefield, Stratmoor and Colorado Springs. If you’re just outside town and wondering whether we reach you, the answer is usually yes. See our Fountain page for the full local picture, or call and we’ll confirm your address.

Serving Fountain, CO – Our Local Coverage Area

We serve Fountain and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Repair in Fountain

Why Fountain Chooses Olympus Chimney Sweep

We set the standard for chimney repair in Fountain.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Fountain

Getting your chimney repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Fountain Customers Say

Trusted by homeowners across Fountain and surrounding areas.

★★★★★

"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."

Danika Whitfield
★★★★★

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

Carrie Norris
★★★★★

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

Ruben Rodriguez

Ready for Chimney Repair in Fountain?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Fountain.

(844) 560-6330

Request a Free Estimate in Fountain

Tell us about your chimney repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - We Answer 24/7