Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Manitou Springs
If your chimney is leaking after a storm, has lost its cap to a wind gust, or is shedding mortar onto the roof, we can help. We handle chimney repair and inspection for the historic homes packed along Fountain Creek and the steep lots of the Manitou Springs canyon, and access is a big part of what makes work here different. Call (844) 560-6330 to set up an estimate.
Key takeaways:
- Storm-driven trouble leads the list here: cracked crowns, missing caps, flashing leaks.
- Steep, tight lots mean roof rigging often replaces ordinary ladder work.
- Every recommendation is tied to something we’ve documented on camera.
Why Manitou Springs Homeowners Call Olympus Chimney Sweep for Chimney Repair
Homeowners in this town call us because we can look at a damaged stack and then fix it, rather than writing a referral. Sweep, inspection, and repair are three services under one roof. When a Level 2 inspection turns up a cracked crown, a failed flashing seal, or an unlined flue, you’re not hunting down a second contractor while the weather waits.
We work with product lines the trade recognizes: DuraFlex flexible liners for damaged flues, HeatShield resurfacing for flue restoration, Gelco caps for wind-exposed stacks, and Copperfield supply-grade masonry materials. Using those names matters here, where a repair has to hold against wind that pours down the Pikes Peak foothills.
Our technicians have up to 13 years of experience, and they’re set up to rig safely from roofs on lots where ladders simply won’t work. Estimates are free, and the written estimate sets the final price.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Masonry Repair in Manitou Springs
Chimney Masonry Repair in Manitou Springs usually starts with mortar, and mortar problems in this town are about the stack as much as the weather. Much of the housing is late-1800s to early-1900s Victorian, Queen Anne, and miner’s-cottage stock in local stone and brick. Many of those chimneys are unlined brick or clay tile from a century ago, and the joints have seen over a hundred winters of freeze-thaw. A typical repointing or spalling brick repair runs $450 to $1,800, with a partial rebuild on a failing upper stack higher than that. The written estimate sets the final price.
Tuckpointing the joints
Replacing crumbling mortar joints before they take brick faces with them is the least expensive way to lengthen a stack’s life. We match the mortar to the old masonry so the repair doesn’t look like a patch. Fragile historic stacks get hand work, not a grinder run wild.
Spalling and stacked faces
When water gets in and freezes, brick faces spall and brick cores go soft. We replace the damaged units and check what’s behind them. A stack built tight against a neighboring wall gets a close look in the tightest spots, because there’s little clearance to work.
Chimney Cap Installation in Manitou Springs
Chimney Cap Installation in Manitou Springs is a wind story before anything else. A cap here has to survive gusts funneling down the canyon and protect the flue from driving rain that needles under the edges. A typical cap installation runs $250 to $900 depending on the cap and the flue, and a lost cap the wind took with it gets replaced properly, not strapped back on crooked. The written estimate sets the final price.
The right cap for a windy stack
A single-flue Gelco or a comparable stainless cap holds up better than a lightweight flimsy cover that flutters loose in a first good blow. We size the cap to the flue so it’s not loose in the mount. The right cap also keeps birds, squirrels, and debris out of an open flue.
After a storm takes one off
A displaced cap leaves the flue wide open, and the next rain heads straight down the liner. If you hear something rattling or dangling on the roof after a wind event, get it looked at. We check the rest of the stack while we’re up there.
Trusted Brands We Service in Manitou Springs
We work with Olympia Chimney, Famco, Gelco, and Copperfield materials, and we install DuraFlex flexible linear systems and HeatShield resurfacing. These are the professional-grade lines technicians use to repair flues, seal crowns, and cap flues. A cracked crown or a compromised liner gets matched with the right component. We order what the job calls for and keep timelines tidy. The written estimate sets the final price before work begins.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Manitou Springs Homes
- Cracked crowns after wind and rain. Wind-driven rain and hail crack chimney crowns, opening a path for water to freeze inside the masonry. Once it’s in, the spalling and mortar erosion start, and a small repair grows.
- Displaced caps from wind gusts. A severe gust can toss a cap and leave the flue exposed. That invites debris, animals, and direct rain into a liner that may be a century old.
- Flashing failures on steep roofs. Water finds its way around a worn flashing seal and travels, so it often shows up as a ceiling stain well away from the chimney. Steep roofs make that failure easy to miss from the ground.
- Old unlined brick flues. The original chimneys in Manitou Springs were often built with no liner and clay tile at best. That means hand-sweeping and a liner assessment, not a quick brush-and-go.
Pricing for Chimney Repair in Manitou Springs, CO
Chimney repair here is priced per job, not by a flat fee, because a cracked crown and a collapsed clay flue are very different work. Typical ranges in Manitou Springs run $450 to $1,800 for masonry and repointing, $250 to $900 for a cap installation, and $250 to $350 for a sweep and inspection. Liner work with a DuraFlex system is quoted after the flue is assessed. The estimate is free, and the written estimate sets the final price.
We Also Serve Cities Near Manitou Springs
We work throughout the Pikes Peak region, with service extending to Colorado Springs, Stratmoor, Cimarron Hills, and Security-Widefield. The canyon conditions change once you drop off the slopes, but the inspection and repair standards don’t. If you’re just outside the Manitou Springs city limits, call and we’ll confirm coverage.
Serving Manitou Springs, CO – Our Local Coverage Area
We serve Manitou Springs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Manitou Springs
You usually can’t tell from the ground, so the reliable answer is a Level 2 inspection that gets eyes and a camera up top. A cracked crown often shows as a faint ceiling stain or crumbling mortar at the stack’s top. Call (844) 560-6330 for an exact quote – estimates are free.
A stainless or clearly sturdy single-flue cap, sized and mounted to the flue, holds up far better than a lightweight cover that rattles loose in the first good gust. Wind funneling down the canyon is exactly what tests a cheap cap. Call (844) 560-6330 for an exact quote – estimates are free.
Stop using the fireplace and get the flashing looked at, because a leak around the flashing can also mean water is reaching the attic and framing. What appears as a ceiling stain usually traces back to a worn flashing seal on a steep roof. Call (844) 560-6330 for an exact quote – estimates are free.
Once a year is the standard, and here it matters more because wood-burning fireplaces see hard seasonal use at 6,400 feet. Creosote buildup and a cracked crown both hide where you can’t see them. Call (844) 560-6330 for an exact quote – estimates are free.
Yes, and it starts with an assessment, not a promise. Many original brick chimneys here are unlined or clay-tile, so the right fix is often a DuraFlex liner sized to the flue, with HeatShield resurfacing where the masonry needs it. Call (844) 560-6330 for an exact quote – estimates are free.
If a storm has left your chimney leaking, missing its cap, or shedding mortar, don’t wait for the first cold snap to sort it out. Call Olympus Chimney Sweep today for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Reach us at (844) 560-6330. Find our full repair work at chimney repair.
Written by the team at Olympus Chimney Sweep.