Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Monument
If your chimney has cracked tile, loose mortar, or a crown that’s letting water in, we repair it in Monument and we show you the evidence first. We work the Palmer Divide regularly, so we know what a 7,000-foot heating season does to a masonry stack, and we know how a foothills cabin differs from a subdivision build off the U.S. 105 corridor. That matters more than any sales pitch. Nothing gets recommended here without a camera look down the flue that you can see for yourself. Our technicians have up to 13 years of experience, and we answer 24/7 at (844) 560-6330.
Why Monument Homeowners Call Olympus Chimney Sweep for Chimney Repair
We’ve built a reputation in Monument on diagnosis, not on pressure. The work we do here is repair-capable from the first visit, so if a camera inspection turns up a cracked tile or a spalled crown, you’re not handed a referral and told to call someone else. We assess structural integrity and venting performance, then talk through the options with photos in front of you.
Monument customers tend to be informed. They run their fireplaces and stoves hard and they want a technician who can read a flue and explain what’s happening. We respect that, and we return the favor by putting the evidence on the screen. When we say a repair can wait, we mean it.
Response to Monument is straightforward. We dispatch Sunday through Friday, 7am to 7pm, and we don’t promise times we can’t keep. Our scope stays inside three confirmed services: cleaning, inspection, and repair. That focus is why Monument homeowners call us back, and it’s why property managers around the Rampart Range keep our number.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Crown Repair in Monument
Chimney crown repair in Monument is usually the first thing we look at on an older masonry stack, because the crown is where freeze-thaw damage starts. The crown is the concrete or mortar cap on top of the chimney, and its job is to shed water away from the brick below. At this elevation, hard overnight freezes keep opening hairline cracks, and once they’re open, snowmelt and rain work their way into the masonry. A typical crown repair in Monument runs $450 – $1,200, depending on whether we recast the crown or rebuild it, and whether the top courses of brick need replacing at the same time.
What the repair actually involves
We remove the failed crown material, shape a new sloped surface that sheds water, and seal the joint where the crown meets the flue. On badly deteriorated crowns we form a new one over the flue tile. None of this gets sold until you’ve seen the cracks on our camera or in photos.
Signs you need it before the next snow
Look for crumbs of concrete on the roof or in the firebox after wind, a crown that feels soft or crumbly, or water staining on the ceiling near the chimney chase. Those are the cues to call us before the long heating season starts.
Chimney Repair Companies in Monument
Chimney repair companies in Monument are not all doing the same work, and the difference shows up on the older Palmer Divide stacks. Some outfits sweep and refer; we sweep, inspect with a camera, and repair in the same visit. Crown work, flashing, repointing, and liner restoration stay in our scope. A typical chimney repair in Monument runs $350 – $1,800 for masonry and flashing work, and liner replacement is priced separately after inspection.
Repointing and spalling brick
Spalling brick means the face of the brick has popped off, and mortar joints have gone soft and sandy. We cut out the failed mortar and tuckpoint it with material matched to the original, which slows the water damage instead of hiding it behind a coat of paint.
Flashing and waterproofing
Failed flashing at the roof line is one of the quietest leaks a chimney develops. We repair the flashing and apply a vapor-permeable waterproofing that lets the masonry breathe. That combination keeps meltwater out without trapping moisture inside.
Trusted Brands We Service in Monument
The materials we work with are professional-grade, and they matter on a high-altitude stack. HeatShield resurfacing restores a damaged flue from the inside, which suits older masonry where the tile has cracked but a full reline isn’t yet needed. Gelco caps handle the wind and snow load up here, and Famco venting components work with the appliances we see in Monument homes. We don’t stock parts, so turnaround depends on the product and we’ll give you a straight answer on timing. If a manufacturer-specific part is required for a factory-built chimney, we source it to fit the unit. Our estimates are free, and the written scope sets the final price.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Monument Homes
- Cracked clay-tile flue liners. Repeated freeze-thaw at 7,000 feet splits the tile and opens the joints. That’s a problem when a wood stove or insert was vented into a stack never sized for it, because the appliance then drafts poorly.
- Cracked crowns and failed flashing. Snowmelt finds every gap during the long heating season. Left alone, water soaks into the masonry and starts spalling the brick from the inside out.
- Brittle, flaky creosote glaze. Palmer Divide down-drafts pack creosote and ash against the smoke chamber and damper. This is harder to remove than soft soot and can ignite suddenly.
- Factory-built metal chimneys in 2000s-era subdivisions. These builds often used metal chimney systems that need manufacturer-specific inspection protocols and brushes, not the same approach as masonry.
Pricing for Chimney Repair in Monument, CO
Here’s what the work typically runs in Monument. A crown repair is $450 – $1,200. Masonry repair, including repointing and flashing, is $350 – $1,800 depending on how much of the stack is involved. Tuckpointing on a smaller job often lands in the lower half of that range. Liner restoration with HeatShield or liner installation is quoted separately once we’ve seen the flue on camera. What moves the price is access, the height of the stack, and how much water damage is already in the masonry. We don’t quote from the driveway. The written estimate you get after inspection sets the final price, and the estimate is free. Call (844) 560-6330 for an exact quote.
We Also Serve Cities Near Monument
We work the whole north end of the county. That includes Woodmoor, Palmer Lake, Gleneagle, and Black Forest, along with the rest of Monument and the U.S. 105 corridor. If you’re just outside town, we can still help. For the full scope of what we do, see our chimney repair page.
Serving Monument, CO – Our Local Coverage Area
We serve Monument and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Monument
Not always. An unlined or clay-tile flue is common on older Palmer Divide homes, and whether it needs a liner depends on what the camera shows: cracked tile, separated joints, or a flue too small for the appliance venting into it. If the tile is sound and the appliance is properly matched, we’ll tell you it can wait. If there’s a gap or a crack, burning is a real risk. We show you the footage, then talk options. Call (844) 560-6330 for an exact quote – estimates are free.
Because the freeze-thaw cycle at this elevation is relentless. At 7,000 to 7,500 feet, hard overnight freezes happen even in the shoulder seasons, and the same chimney that looks sound in July can show cracked tile and a failing crown by January. A crown with the wrong slope sheds water poorly and cracks faster. Recasting it with proper pitch stops the pattern. Call (844) 560-6330 for an exact quote – estimates are free.
Third-degree creosote is a hard, glazed, flaky layer that’s fused to the flue wall, and a standard brush won’t take it off. In Monument’s dry air, creosote forms that brittle glaze faster than the soft soot you see at lower, more humid elevations. Removal depends on the extent; sometimes chemical treatment and mechanical work are needed. We assess it on camera before quoting. Call (844) 560-6330 for an exact quote – estimates are free.
Down-drafts from those windstorms often pack ash and creosote flakes against the smoke shelf and damper, and the damper won’t move freely. Cleaning it out usually means pulling the damper assembly, not just running a brush down from the top. That’s a job worth doing right, because a jammed damper is also a draft problem. If it’s more than debris, we can repair the damper itself. Call (844) 560-6330 for an exact quote – estimates are free.
Yes. Factory-built metal chimneys in the newer Monument subdivisions need manufacturer-specific inspection protocols, brushes, and parts, and the fix isn’t the same as repointing brick. We identify the system, inspect it to its own standard, and source the correct component for the unit. That’s why we ask what your chimney is before we book. Call (844) 560-6330 for an exact quote – estimates are free.
If your chimney is showing cracked tile, a crumbling crown, or a damper that won’t close, don’t wait for the next freeze to find out how bad it is. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (844) 560-6330 for a free estimate and we’ll get eyes on the flue.
Written by the team at Olympus Chimney Sweep.