Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Woodmoor
If you’re in Woodmoor and your stove is smoking back into the room, or it’s simply been a season or two since the flue was cleaned, we’re the team to call. Olympus Chimney Sweep works throughout this wooded corner of the Palmer Divide, and we know the housing stock here well: the large custom and semi-custom homes on acreage lots, many of them built from the 1970s through the 1990s, with masonry fireplaces and freestanding wood stoves that carry heavy creosote loads through a long, cold winter at 7,000 feet. Call (844) 560-6330. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday.
Key Takeaways
- A standard sweep in Woodmoor typically runs $180 to $320; a Level 2 camera inspection runs $250 to $450.
- Woodmoor’s 1970s-1990s masonry chimneys often have clay-tile flues that have never been relined, so what a brush finds is only the surface.
- Nothing is recommended without camera evidence you can see on-screen yourself, and we’ll tell you plainly when work can safely wait.
- Full-service capability means a problem found during inspection can be addressed on the same call, not booked out to a second contractor.
Why Woodmoor Homeowners Call Olympus Chimney Sweep for Chimney Sweep
Woodmoor isn’t a suburban gas-appliance market. It’s a wood-burning community inside the wildland-urban interface, surrounded by dense ponderosa and lodgepole pine, and the work here reflects that. Homeowners in this area burn hard through an extended season and want a technician who can diagnose a problem and fix it, not just run a brush and hand out a referral. That’s the whole reason we run chimney sweep, inspection, and repair as one scope of work.
Our technicians have up to 13 years of experience, and we work with the professional-grade product lines trusted by certified chimney technicians nationwide: DuraFlex liner systems, HeatShield resurfacing, Gelco caps, Famco venting components, and Copperfield supply-grade materials. When an inspection turns up a problem, we can talk through the remedy with those materials in hand rather than pointing you elsewhere. Response into Woodmoor is straightforward from our Colorado Springs service area, and dispatch runs Sunday through Friday, 7am to 7pm.
The trust piece is what matters most on older homes. There’s a reason Woodmoor homeowners ask pointed questions before they book, and we’d rather answer them than sell around them. We don’t recommend a liner or a rebuild on sight. We show you the evidence first.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Services in Woodmoor
Chimney Services in Woodmoor start with cleaning, and the cleaning is where the real information shows up. A typical annual sweep in Woodmoor runs $180 to $320, and it includes more than a brush and a vacuum: we assess the firebox, the smoke chamber, the damper, and the visible flue, and we tell you what we see. If you’ve just moved into a 1980s home on the wooded acreage west of the highway and you don’t know the chimney’s history, this is where to start. Book it before burning season, not after the first smoky backdraft.
Annual Sweep and Creosote Removal
Annual cleaning is the baseline for any wood-burning appliance, and in Woodmoor’s extended cold season the creosote accumulates faster than most homeowners expect. Soot and creosote removal clears the flue and smoke chamber so draft pulls correctly and the fire burns clean. If the deposit is glazed rather than powdery, a standard brush won’t touch it, and we’ll talk through a chemical or rotary approach based on what the camera shows.

Fireplace and Soot Cleaning
Fireplace cleaning handles the firebox, glass, and hearth area so the whole assembly is ready for the season, not just the flue. Soot removal extends to the smoke chamber, where deposits hide above the damper and restrict draft. Both are part of the same visit as your sweep, and both are included in the estimate we give you before we start.

Chimney Sweep Certified in Woodmoor
Chimney Sweep Certified in Woodmoor means the work is done to a professional standard and documented, not just performed. Our technicians have up to 13 years of experience and work with the same professional-grade products used by certified chimney technicians across the industry. A Level 1 inspection runs $150 to $250 and covers the readily accessible portions of the chimney, appliance, and vent connection. A Level 2 inspection runs $250 to $450 and includes a camera run through the flue, which is what you need on an older Woodmoor home where the flue interior is a mystery.
Level 1 and Level 2 Inspections
A Level 1 is the routine annual check for a chimney with no known issues and no recent changes to the appliance. A Level 2 is the diagnostic one: it’s what you want after a new stove or insert goes in, after a chimney fire, or any time the flue has never been looked at with a camera. We don’t just look, we assess structural integrity and venting performance, and we show you the footage.
Camera-Verified Findings
Camera inspection is the difference between a real diagnosis and a guess. On Woodmoor’s older clay-tile flues, a brush passes right over hairline cracks and gaps at the mortar joints that let creosote seep behind the tile. We put the camera feed in front of you and walk through what it shows, so any recommendation you hear is one you can verify for yourself.
Trusted Brands We Service in Woodmoor
We work with Olympia Chimney, Famco, Copperfield, and DuraFlex, and those names matter when we’re specifying a repair for a Woodmoor home. DuraFlex flexible liner systems let us reline a damaged or undersized flue with a permanent solution rather than a patch. HeatShield resurfacing restores a deteriorating flue interior that most sweep-only operations can’t address. Gelco caps replace a failing spark arrestor with a properly screened cap that keeps pine needles and debris out. These are supply-grade materials, not hardware-store substitutes, and turnaround is quick because we’re not waiting on a second company to source them. What we don’t do is claim to stock parts locally.
Common Chimney Sweep Problems We See in Woodmoor Homes
The housing stock here produces a fairly consistent set of issues, and they’re worth knowing before you light the first fire of the season.
- Clay-tile flues with cracks and spalling mortar. The 1970s-1990s masonry fireplaces common in Woodmoor were often built with clay-tile flues that lack a listed liner. Over decades of freeze-thaw cycling, those tiles develop hairline cracks and the mortar joints spall, letting creosote seep behind the tile where a brush can’t reach it. That’s a hidden fire risk, and only a camera reveals it.
- Clogged spark-arrestor caps after fall winds. Woodmoor sits among dense ponderosa and lodgepole pine, and fall winds drive pine needles and debris into spark-arrestor screens and caps. The result is a smoky backdraft right when homeowners first fire up their stoves for the cold snap.
- Third-degree glazed creosote in an extended season. Long, cold winters with rapid freeze-thaw swings mean chimneys cycle repeatedly between hot fires and cold drafts, which accelerates creosote buildup and glaze formation. Glazed creosote in the stovepipe and smoke chamber won’t come off with a standard brush.
- Modern appliances vented into stacks never designed for them. High-efficiency inserts and wood stoves are frequently installed into original masonry chimneys sized for an open fireplace. The mismatch affects draft and venting performance, and it’s a common finding when we inspect an older Woodmoor home.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Sweep in Woodmoor, CO
A typical chimney sweep in Woodmoor runs $180 to $320, which covers the cleaning plus a visual assessment of the firebox, damper, and accessible flue. A Level 1 inspection runs $150 to $250 and a Level 2 camera inspection runs $250 to $450. What moves the number: the number of flues, how much creosote has built up, whether the flue needs camera work, and whether the appliance is a fireplace or a freestanding stove. Repairs are quoted separately once we know what the camera shows, and the written estimate sets the final price. Estimates are free. Call (844) 560-6330 for an exact quote.
We Also Serve Cities Near Woodmoor
Woodmoor sits just north of Colorado Springs, and we work the surrounding communities on the same dispatch: Monument, Palmer Lake, Gleneagle, and Black Forest. The same housing stock and the same pine-driven creosote loads show up across all of them. If you’re in any of these towns and wondering whether we cover your street, call and ask. You can also read more about our work in Woodmoor, or see the full scope of our chimney sweep service.
Serving Woodmoor, CO – Our Local Coverage Area
We serve Woodmoor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Woodmoor
A standard brush sweep alone isn’t enough on an 1980s clay-tile flue because the brush can’t see cracks, gaps at the mortar joints, or creosote that has seeped behind the tile. We recommend a Level 2 camera inspection first on any home of that era, especially if the flue has never been checked. The camera tells us whether a sweep is all you need or whether the tile itself is compromised. Call (844) 560-6330 for an exact quote – estimates are free.
The most common cause is a spark-arrestor cap clogged with pine needles and wind-blown debris after the fall winds, which blocks draft and pushes smoke back into the room. A brush through the flue doesn’t clear the cap, so the sweep alone won’t solve it. We check the cap and screen as part of the visit and clear the obstruction. Call (844) 560-6330 for an exact quote – estimates are free.
Third-degree creosote is glazed, hardened, and bonded to the flue surface, and a standard brush sweep cannot remove it. You know it’s there because the camera shows a shiny, tarry layer rather than powdery fluff, and because the deposit resists the brush. Only camera evidence justifies the chemical or rotary treatment needed. Call (844) 560-6330 for an exact quote – estimates are free.
Yes. A high-efficiency insert vented into an unlined or original clay-tile flue is a common mismatch, and the flue was never designed for that appliance’s venting requirements. The question is whether the existing flue can be brought into compliance with a listed liner, which is where DuraFlex and HeatShield come in. We inspect with a camera and show you the flue interior before recommending anything. Call (844) 560-6330 for an exact quote – estimates are free.
Expect a full assessment, not just a cleaning. We run the sweep, inspect the firebox, damper, smoke chamber, and accessible flue, and on an older home we recommend camera work to see what the brush passes over. In a typical Woodmoor home, a homeowner fires up a freestanding wood stove on the first cold snap and gets smoke rolling into the room instead of up the stack; the usual cause is a clogged cap compounded by glazed creosote in an unlined flue. A qualified local technician runs a Level 2 inspection with a camera, shows the clogged cap and glazed flue on-screen, clears the debris, and only discusses a liner solution if the camera confirms cracked tiles or gaps. Call (844) 560-6330 for an exact quote – estimates are free.
Book Your Chimney Sweep in Woodmoor
If you’re in Woodmoor and the flue hasn’t been looked at with a camera, that’s the place to start. We’ll clean what needs cleaning, show you what we find, and tell you honestly when a problem can wait and when it can’t. Full-service scope means a problem found during inspection can be addressed on the same call with HeatShield resurfacing or a DuraFlex liner, so you’re not chasing a second contractor. Call (844) 560-6330 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday.
Written by the team at Olympus Chimney Sweep.