Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Colorado Springs
If you live in Colorado Springs and your fireplace has gone a season or two without attention, the sweep you book should do more than push a brush. Here, at the foot of Pikes Peak, the altitude and the freeze-thaw cycle change what a chimney actually needs. We work with homeowners across Colorado Springs who use their fireplaces seriously and want a technician who can look, document, and fix a problem on the same visit. Call (844) 560-6330. We answer 24/7.
Why Colorado Springs Homeowners Call Olympus Chimney Sweep for Chimney Sweep
Word travels in a city where people talk to their neighbors about contractors. Our reputation in Colorado Springs rests on a simple discipline: we assess the flue with a camera before we recommend anything, and we show you the footage. If a liner is sound, we say so. If a crown is failing, you see why.
That approach matters most in neighborhoods where the housing stock is a century old and every flue is a little different. Old Colorado City and the Near North End are full of original masonry stacks, and a technician who treats them like a modern subdivision chimney will miss the real issues. Our technicians have up to 13 years of experience, and they know the difference between a stack that needs a sweep and one that needs a liner.
We serve Colorado Springs and the surrounding communities through independent local professionals who perform the work, which means a real local technician arrives ready to diagnose, not to hand you a referral list. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (844) 560-6330 and we will get you on the schedule.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Sweep Certified in Colorado Springs
Chimney Sweep Certified service in Colorado Springs means a technician who understands that this is a safety assessment, not a cosmetic brush-down. In Colorado Springs, where the air is thin and the winters swing hard between freeze and thaw, a sweep includes creosote removal, soot removal, a check of the damper and smoke chamber, and a look at the crown and flashing. Most homes here need an annual sweep, and the cost for a standard cleaning typically runs $150 to $325 depending on flue condition and access; a Level 2 inspection, which adds camera work and documentation, typically runs $275 to $550. The written estimate sets the final price.
Soot and creosote removal
Creosote is the reason a sweep exists. At high altitude it can build faster than at lower elevations, and once it glazes it hardens into a tar-like layer a brush alone will not remove. We assess the degree and remove what can be safely removed.
Flue and damper check
While we are in the flue, we check the damper seal, the smoke shelf, and any obvious gaps in the masonry. A flue that drafts poorly or a damper that sticks are worth knowing about before the next heating season.
Gas Fireplace Cleaning in Colorado Springs
Gas Fireplace Cleaning in Colorado Springs addresses a different set of problems than a wood-burning sweep. Gas appliances still produce deposits on the logs, glass, and burners, and the venting has to be checked just as carefully. In the older central neighborhoods, gas inserts and stoves are often vented into a flue that was built for wood, so the technician has to confirm the stack is appropriate for the appliance. Cleaning typically runs $125 to $250, and a venting inspection adds cost if the flue needs a closer look. A Colorado Springs homeowner should book this when the glass clouds, the flame looks off, or the appliance has not been serviced in a year or more.
Log and burner deposits
Soot and mineral films collect on vented gas logs and burners and can affect how the unit burns. Cleaning restores the look and lets us spot wear on the components.
Venting and draft check
We confirm the vent path is clear and the appliance is drafting correctly. A gas appliance vented into an oversized flue can struggle to draft, which is worth documenting.
Trusted Brands We Service in Colorado Springs
When a repair is warranted, we work with product lines trusted by certified chimney technicians across the industry. For flue relining we install DuraFlex systems, and for flue resurfacing we use HeatShield. Caps and venting components come from names like Gelco and Famco, and we draw on Copperfield supply-grade materials and Olympia Chimney products where they fit the job. We do not stock parts on a truck or in a warehouse; the right component is ordered for the job and installed when it arrives. What that means for a Colorado Springs homeowner is a lineup of professional-grade products, with the timeline explained before we order anything.
Common Chimney Sweep Problems We See in Colorado Springs Homes
- Cracked clay-tile flue liners in older central homes. Decades of freeze-thaw crack the tiles, and the gaps go unnoticed until a camera reveals them. That is why we run a Level 2 inspection when the flue is old or has never been scoped.
- Factory-built fireplaces cleaned with the wrong tools. Many 1990s and 2000s subdivisions on the north and east sides have metal fireplaces that need specific brushes. The wrong one damages the inner liner and can void the manufacturer’s rating.
- High-altitude draft problems. Thinner air weakens draft, so first-degree creosote flakes onto the damper and smoke chamber. Homeowners often mistake it for ordinary soot a sweep will fix.
- Crown and mortar deterioration from intense UV and freeze-thaw. High-altitude sun and snow cycles break down crowns and mortar joints, and summer hail can damage exterior components. A failing crown lets water into the stack.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Sweep in Colorado Springs, CO
A typical annual sweep in Colorado Springs runs $150 to $325, and that range reflects the flue, the access, and how much creosote has built up. A Level 1 inspection typically runs $125 to $225, while a Level 2 inspection with camera documentation typically runs $275 to $550. Creosote removal on a heavily glazed flue costs more than a routine cleaning because it takes longer and more care. Where a repair is warranted, HeatShield resurfacing or a DuraFlex liner is priced on its own written estimate after we look. Nothing is recommended without camera evidence you can see, and we tell you plainly when work can safely wait. Estimates are free. Call (844) 560-6330 for yours.
We Also Serve Cities Near Colorado Springs
Homeowners just outside the city limits often have the same older flues and the same altitude-driven creosote issues. We also work with residents in Cimarron Hills, Stratmoor, Security-Widefield, and Manitou Springs, and the drive does not change how we assess a stack. If you are in Colorado Springs proper, our chimney sweep team covers your neighborhood too. Call (844) 560-6330 to book.
Serving Colorado Springs, CO – Our Local Coverage Area
We serve Colorado Springs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Colorado Springs
At over 6,000 feet, thinner air makes wood burn less completely, so creosote builds faster and reaches glazed third-degree form sooner than at lower elevations. Most Colorado Springs homes we work on should be swept annually, and a heavily used fireplace may need it sooner. Call (844) 560-6330 for an exact quote. Estimates are free.
You may only need a sweep, and a camera inspection is what tells us for certain. In many early-1900s homes here the clay tiles have cracked from freeze-thaw, and a newer appliance has been vented into a stack never designed for it. We recommend a liner only when the footage shows gaps or spalling, and often HeatShield resurfacing handles the flue instead. Call (844) 560-6330 to schedule the inspection.
A Level 2 inspection is the level most insurers ask for after a wildfire event, because it includes camera documentation of the flue. That footage is what you hand to your insurer. We can inspect, document, and address anything found on the same visit. Call (844) 560-6330 to book.
Factory-built metal fireplaces have an inner liner that a standard wood-burning brush can damage, so they need different tools and a technician who knows the difference. Cleaning the wrong way can void the manufacturer’s rating. Call (844) 560-6330 and tell us what kind of unit you have.
First-degree creosote is flaky soot a brush removes, while third-degree is glazed and hard and requires more careful removal. The altitude here pushes creosote toward the glazed stage faster, which is why we inspect before we sweep. Call (844) 560-6330 for an exact quote. Estimates are free.
Book Your Colorado Springs Chimney Sweep
Whether your home is an older brick house near Old Colorado City or a newer north-side build with a factory-built fireplace, a sweep from Olympus Chimney Sweep gives you a clear picture of what your flue needs. We assess with a camera, recommend only what the footage shows, and stand behind the work through licensed, insured local professionals. Call (844) 560-6330 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Olympus Chimney Sweep.