Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Colorado Springs, CO
We provide independent Gelco service across Colorado Springs, and the one thing that makes our Gelco work here different is altitude. At over 6,000 feet, wood burns differently, draft is thinner, and creosote flakes settle into cap screens faster than they do in lower-elevation cities. That changes how we clean, inspect, and advise on every Gelco cap and crown we touch. Call (844) 560-6330 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Colorado Springs Residents Choose Us for Gelco Service
Gelco caps and crown coatings take a beating in Colorado Springs. The sun here is intense, the nights swing cold, and the wind comes off the Front Range with real force. Those conditions find every weak point in a cap, a weld, or a bead of crown coating. We know where Gelco equipment tends to fail because we work on it regularly, and we bring quality parts that fit the specific cap or crown in front of us rather than a one-size substitute.
We’re an independent Gelco service provider, not affiliated with or authorized by the manufacturer. That independence is useful. We don’t have a reason to steer you toward a new cap when a screen swap, a reseat, or a UV-resistant crown coating will do the job. Scheduling is straightforward: you call, we book a visit, and the technician arrives knowing what kind of chimney and cap the home has. Our technicians have up to 13 years of experience, and we handle cleaning, inspection, and repair as one service, so a problem found during the visit gets addressed the same call.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Colorado Springs
These are the failures we see most often when servicing Gelco equipment in Colorado Springs. Each one connects to how this city’s climate and housing stock treat a chimney.
- Crown coating degradation from high-altitude UV and freeze-thaw. The intense sun at this elevation breaks down coatings faster, and every freeze-thaw cycle works hairline cracks wider. Once water gets into those cracks, it refreezes, expands, and the damage compounds. We prep the crown properly and recoat with a UV-resistant product rather than painting over the problem.
- Stainless steel caps loosening or corroding at weld points. Wind-driven debris and moisture from spring downdrafts stress the welds on stainless caps. A cap that rattles or shifts is a cap that’s no longer sealing. We check fasteners and weld integrity on every visit and replace what’s failing.
- Multi-flue cap screens clogging with creosote flakes and soot. At 6,000-plus feet, draft is weaker and creosote behaves differently. Flakes collect in the screen faster, cutting airflow and causing smoke rollback into the living space. Clearing those screens is a core part of what we do here.
- Custom cap fitment issues on older masonry chimneys. Homes in Old Colorado City and the Near North End often have original clay tile flues that are no longer square after a century of freeze-thaw. A cap that fit when installed can develop gaps later. We measure and fit to the flue you actually have.
- Caps damaged by hail and summer storms. Colorado Springs hail and thunderstorms dent screens, crack crown coatings, and knock caps out of level. We inspect exterior components after storm season and repair or replace as needed.
Gelco Service in Colorado Springs: What Local Conditions Mean for Your Equipment
Here’s the local factor that shapes Gelco work in this city more than any other: the post-wildfire insurance environment. After major fires like Waldo Canyon and Black Forest, many Colorado Springs homeowners get requests from their insurers for documented chimney inspections and cleaning as part of wildfire-mitigation compliance, even in houses nowhere near the burn scar. That changes what a Gelco cap and crown service call involves. It’s not just maintenance. The documentation matters. A properly seated, intact cap and a sound crown coating are part of what an inspector looks at, and a written record of the work supports the compliance file. We photograph what we find and note the condition of the cap, screen, and crown so you have something concrete to hand over. Routine maintenance here carries a second purpose, and we plan the visit accordingly.
Gelco Models & Products We Service in Colorado Springs
We service the full range of Gelco chimney products you’ll find on Colorado Springs homes: top-mount multi-flue caps, stainless steel rain caps, chimney crown coatings, and custom caps fitted to masonry fireplaces. Each has its own service needs. Multi-flue caps need their screens cleared and their mounting checked. Rain caps need weld and fastener inspection. Crown coatings need prep and recoat when the surface starts to fail. Custom caps on older masonry need refitting when the flue has shifted.
For direct replacements, we favor OEM Gelco parts so the fit and performance match what was there. When OEM is discontinued or lead times run long, we use high-quality aftermarket components that meet the same standard. For more on our depth with this product line, see our page on Gelco chimney services.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Colorado Springs
Every job is priced per job by a written estimate. What drives the cost is the condition of the cap and crown, whether screens can be cleaned or need replacement, and whether a crown coating is a recoat or a full restoration. We give you the written estimate before any work starts. Nothing is added after the fact.
- Cap and screen cleaning during a routine sweep: included in the sweep estimate
- Single-screen replacement on an existing cap: quoted per job
- Full cap replacement, parts and labor: quoted per job
- Crown coating, prep and recoat: quoted per job
- Full crown restoration where the surface has failed: quoted per job
The estimate is free, and it includes a look at the cap, crown, and flue condition so you know what’s actually needed. If work can safely wait, we’ll say so. Call (844) 560-6330 to book.
Serving Colorado Springs, CO – Our Local Coverage Area
We serve Colorado Springs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Colorado Springs
At over 6,000 feet, thinner air means weaker draft, and weaker draft means creosote flakes and soot don’t get carried up and out as efficiently. They settle in the screen instead. The high-altitude burn cycle also produces creosote that behaves differently than at sea level, and the dry, windy springs stir up debris that adds to the load. The result is a screen that needs clearing more often here than in a lower city.
Yes, when it’s applied correctly and maintained. A UV-resistant crown coating seals the masonry surface against water intrusion, and water is what drives freeze-thaw damage. The key is prep. Coating over a cracked, dirty crown doesn’t last. We clean and prep the surface first, then apply the coating so it bonds properly. Recoat when the surface starts to dull or show hairline cracks, and the crown stays protected.
It can. Insurers requesting wildfire-mitigation documentation often want to see that the chimney is intact and properly capped. A Gelco cap that’s seated correctly with intact screens and a sound crown coating supports that file. We inspect the cap, crown, and flue, and we photograph what we find so you have a record to provide. Call (844) 560-6330 if you need that inspection scheduled.
Once a year, alongside your annual sweep. The altitude, UV, and freeze-thaw conditions here work on a cap year-round, and the spring wind season and summer hail add stress. An annual look catches a loosening cap or a failing screen before it becomes a water-intrusion problem. If you burn heavily through the winter, the screens may need clearing more than once a season.
In many cases just the screen can be replaced, and that’s what we’ll recommend when the cap body and mounting are still sound. We only advise a full replacement when the frame, welds, or mounting have failed. We’ll show you the condition and explain the call. Call (844) 560-6330 for an exact quote – estimates are free.
Service Areas Near Colorado Springs
We serve homeowners across the Colorado Springs area, including Cimarron Hills, Stratmoor, Manitou Springs, Security-Widefield, and the Air Force Academy area. If you’re in or around Colorado Springs, we can schedule a Gelco cap or crown service visit. Mention your neighborhood when you call and we’ll note the housing style so the technician arrives prepared.
Book Your Gelco Service in Colorado Springs Today
Call (844) 560-6330 to book a free estimate on Gelco cleaning, inspection, or repair in Colorado Springs. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Tell us about your cap or crown, and we’ll set up a visit that fits your schedule.
Written by the team at Olympus Chimney Sweep.