Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Stratmoor, CO
We provide independent DuraFlex service across Stratmoor, cleaning, inspecting and repairing flexible stainless liner systems and the caps, top-sealing dampers and insert terminations that go with them. What makes our DuraFlex work here different is wind: Stratmoor sits at the foot of Cheyenne Mountain in the 80902 ZIP, and downslope gusts off the mountain are the reason more of our calls here start with a loose cap than with a dirty flue. We’re an independent shop, not a DuraFlex dealer, and we say so plainly. Call (844) 560-6330. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Stratmoor Residents Choose Us for DuraFlex Service
DuraFlex liners have specific installation and clearance requirements, and those requirements were written for exactly the conditions Stratmoor produces: high wind, roughly 6,000 feet of elevation, cold winters and heavy spring snow. Our technicians have up to 13 years of experience and read those requirements as written, which means the advice you get on your cap, your draft and your liner condition is tied to the system actually installed in your chimney, not a generic script.
We work with professional-grade product lines across the trade, including HeatShield, Gelco, Famco, Olympia Chimney and Copperfield, so the parts sourced for your repair are chosen for fit and clearance rather than convenience. Scheduling is straightforward: you describe the problem, we book the visit, and the cap re-securing, creosote removal and Level 2 camera inspection happen under one company. Found during inspection, fixed on the same call. That matters in Stratmoor, where a chimney issue found during a sale or a rental turnover has a deadline attached to it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Stratmoor
The problems below are the ones we see repeatedly on DuraFlex systems in Stratmoor, and every one of them has a local cause behind it.
- Caps and top-sealing dampers loosened or missing after wind events. Downslope winds off Cheyenne Mountain work chimney caps and top-sealing damper assemblies until they no longer seal. Once the cap is gone or rattling, the flue is open to rain, snow and downdraft, and the fix is re-securing or replacing the assembly before the next storm.
- Unlined or partially detached flexible liner above a retrofitted insert. Many Stratmoor fireplaces were built as masonry and later fitted with a wood-burning insert. The liner run above the insert can be missing sections or detached at a joint, and camera inspection is the only way to see it.
- Creosote glazing heaviest on the wind-swept side of the flue. Downdrafts cool smoke before it clears the flue, and cooled smoke condenses faster. In Stratmoor’s cold foothill winters that shows up as hard, glazed creosote concentrated on one side, which a standard brush pass can skate right over.
- Draft reversal and smoke spillage from direct-vent or insert terminations. When a DuraFlex direct-vent or insert termination is positioned wrong for the local wind exposure, smoke comes into the room on gusty days. The appliance is usually fine; the termination is the problem.
- Liner wear hidden behind a clean-looking firebox. Flexible stainless liners age from the inside out. A firebox that looks fine tells you nothing about the liner run above it, which is why we camera the full length instead of judging by what’s visible.
DuraFlex Service in Stratmoor: What Local Conditions Mean for Your Equipment
Because Stratmoor sits in the 80902 ZIP at the foot of Cheyenne Mountain, a large share of calls here come from military renters and owners who need a documented, inspection-ready chimney condition report for rental turnover or a home sale, often with a Level 2 camera inspection already expected before a DuraFlex insert system is signed off. That changes the shape of the visit. A cleaning alone doesn’t satisfy a buyer, a lender or a landlord; what they want is a written record of what the liner, cap and damper actually look like, with photographs. So on a DuraFlex-equipped Stratmoor ranch, we plan the camera inspection into the appointment from the start rather than treating it as an upsell discovered halfway through. The high-wind foothill exposure around 80902 also means technicians regularly find chimney caps and top-sealing dampers loosened or missing after wind events, so a cleaning visit often turns into re-securing the cap and checking for downdraft before the sweep begins.
DuraFlex Models & Products We Service in Stratmoor
We service DuraFlex PRO flexible stainless liner kits in 6″ and 8″, DuraFlex Sure-Flex flexible liner systems, DuraFlex direct-vent and insert venting components, and DuraFlex top-sealing damper and cap assemblies. That covers the liner run itself, the terminations at the top of the flue, and the hardware that holds it all in place against Stratmoor’s wind.
Parts selection is where a lot of jobs quietly go wrong. We use genuine DuraFlex replacement components for caps, top-sealing dampers and liner terminations where the existing system calls for them. Quality aftermarket stainless or cap hardware is used only where fit and clearance are verified against the installed system. Nothing gets swapped for a close-enough part just to close out a ticket.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Stratmoor
Every job is priced per job by a free written estimate, and the estimate sets the final price. What drives the number is the scope: a sweep and a cap re-securing is a very different visit from a Level 2 camera inspection with a written condition report, and a liner repair is different again from full flexible-liner replacement. On a DuraFlex system in Stratmoor, we don’t recommend liner work without camera evidence you can look at yourself, and we’ll tell you plainly when a repair can safely wait. Call (844) 560-6330 for an exact quote. Estimates are free. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Stratmoor, CO – Our Local Coverage Area
We serve Stratmoor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Stratmoor
A Level 2 camera inspection is the right call for a DuraFlex insert in a Stratmoor ranch, and a sweep alone usually isn’t enough. A sweep clears what’s reachable; the camera shows the liner run above the insert, where detachment and glazing hide. For a rental turnover or a home sale, the inspection is what produces the documented condition report. Call (844) 560-6330 to book one. Estimates are free.
Downslope winds off Cheyenne Mountain put repeated load on cap and damper hardware, and fasteners work loose over seasons of gusting. Once the assembly stops sealing, the flue is open to weather and downdraft, and the fireplace starts behaving badly. Re-securing or replacing the assembly is a localized repair. Call (844) 560-6330 to have it looked at.
Often it is a termination problem rather than an appliance problem. When a DuraFlex direct-vent or insert termination is wrong for the local wind exposure, gusts push air back down the flue and smoke spills into the room. Camera inspection and a look at the termination usually identify it. Call (844) 560-6330 for an exact quote. Estimates are free.
Yes. We do Level 2 camera inspections with a written condition report, which is what Stratmoor landlords, sellers and buyers need when a DuraFlex insert system has to be documented before turnover or closing. Nothing goes into the report that the camera didn’t show. Call (844) 560-6330 to schedule.
No. We’re an independent DuraFlex service provider, not manufacturer-affiliated or authorized, and we don’t present ourselves as a dealer. What we bring is familiarity with how these systems are built and installed, and quality parts selected for fit and clearance. Call (844) 560-6330 for an exact quote. Estimates are free.
Service Areas Near Stratmoor
We also work on DuraFlex systems in Security-Widefield and Colorado Springs, along with Cimarron Hills, Manitou Springs and the Air Force Academy area. The wind exposure and the housing stock shift a little as you move across these places, and the inspection plan shifts with them. Read more about DuraFlex systems or about Stratmoor service on those pages.
Book Your DuraFlex Service in Stratmoor Today
If your DuraFlex cap is rattling, your insert is smoking back on gusty days, or you need a condition report for a Stratmoor closing or rental turnover, call (844) 560-6330. We’ll book a visit and give you a free written estimate that sets the final price. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Olympus Chimney Sweep.