Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Fountain, CO
We provide independent Gelco service across Fountain, CO: cleaning, inspection and repair for Gelco factory-built fireplaces, inserts and cap assemblies, with no manufacturer strings attached. What makes our Gelco work here different is the order we work in. On Fountain’s windy lots, the cap and spark arrestor get checked before the flue is ever scoped, because a packed cap is behind a lot of “smoking” complaints that have nothing to do with draft. Call (844) 560-6330 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Fountain Residents Choose Us for Gelco Service
Gelco equipment rewards someone who has taken these units apart before. The panels, dampers and cap assemblies on a Gelco factory-built fireplace are built to a specific set of tolerances, and a generic sweep who mostly brushes masonry flues will treat your insert like a masonry chimney. That’s where small problems get missed.
We work on Gelco factory-built fireplaces and inserts regularly around Fountain, so the component quirks are familiar: how the refractory panels seat, how the damper frame takes grit, how a multi-flue cap assembly should sit over the termination. Our technicians have up to 13 years of experience in this trade, and the work runs through one company that cleans, inspects and repairs. When we find a cracked panel or a seized damper during the visit, we can quote the fix right there rather than hand you a referral. Scheduling is straightforward: you book a window, we confirm it, and the written estimate sets the price before any repair begins. No surprises on the invoice.
We’re an independent provider. Gelco has not authorized or endorsed us, and that independence is the point. We recommend what your unit actually needs, not what a brand program prefers.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Fountain
- Wind-packed caps and bird nests. On Fountain’s open east-side lots, prairie grit and nests pack straight into Gelco cap and spark arrestor assemblies. This is the most common cause of a Gelco factory-built fireplace smoking back into the room on a windy day. We clear the obstruction before scoping anything, then check that the cap mesh and frame survived the load.
- Cracked or spalled refractory panels. Hard freezes and repeated cold-snap burning take a toll on the firebox panels inside Gelco wood inserts. Spalling panels change how heat moves through the firebox and can expose the structure behind them. We inspect panel faces and seams as part of the cleaning visit, not as a separate trip.
- Warped baffles. Heavy use during a cold snap can warp the baffle in a Gelco wood-burning insert, which throws off draft and burn efficiency. A warped baffle is sometimes repairable and sometimes not; we tell you which, with the evidence in front of you.
- Seized dampers and hinge hardware. Fountain’s freeze-thaw cycles plus blowing grit work into damper frames and hinges, and hardware that sat fine in October can seize by January. We check operation by hand during the cleaning and free or replace what’s binding.
- Creosote glazing in older units. In the 1970s-80s ranch homes around Fountain, older Gelco units often carry glazed creosote where burning habits and marginal draft have compounded over many seasons. Glazed creosote doesn’t brush off like soot, so it gets identified and addressed properly rather than skimmed over.
Gelco Service in Fountain: What Local Conditions Mean for Your Equipment
Fountain sits on the wind-scoured high plains south of Colorado Springs, and that single fact reshapes how a Gelco service call goes here. On windy days along the open east-side lots, homeowners find prairie grit and even bird nests packed into chimney caps, so we inspect the cap and spark arrestor before the flue is ever scoped. A clogged cap on a windy day is often the real reason a fireplace smokes, and no amount of brushing the flue fixes it.
The housing stock reinforces this. Fountain blends mid-century and 1970s-80s single-story ranches with a large wave of 2000s-2010s subdivision homes, many carrying factory-built fireplaces or wood stoves instead of traditional masonry chimneys. That means a technician here works on decades-old fireplaces with heavy creosote history and on builder-installed inserts that have never been cleaned, sometimes on the same stretch of road. Add cold winters with hard freezes and persistent wind, and Gelco components face wind-driven debris plus freeze-thaw stress that accelerates cap damage and creosote buildup. Our approach follows from that: cap and arrestor first, flue second, firebox and damper last.
Gelco Models & Products We Service in Fountain
We service Gelco factory-built wood-burning fireplaces, the builder-grade units common in Fountain’s 2000s-2010s subdivision homes. We also work on Gelco wood-burning fireplace inserts, Gelco gas fireplace inserts, and Gelco multi-flue and spark-arrestor chimney cap assemblies. Each of those has its own cleaning routine and its own wear points, and we don’t run one generic procedure across all of them.
For parts, we favor OEM or exact-fit replacement panels, dampers and caps where they’re available, because aftermarket tolerances on factory-built fireboxes vary enough to matter. When a firebox or flue has structural damage that exceeds repair value, we say so plainly rather than patch it and send you off with a problem. Cap replacement, creosote removal and firebox repair are the three jobs we handle most on Gelco units in Fountain, and all three can be quoted during the same visit that finds the issue.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Fountain
Every Gelco job is priced per job from a written estimate, and the estimate is free. What drives the number is the work itself: whether the cap assembly has to come apart, how much glazed creosote is on the flue, whether a panel or damper needs replacing, and how accessible the termination is on your roof. A straightforward clean-and-inspect on a Gelco insert sits at one end; a firebox repair with panel replacement sits at the other.
You’ll see the scope in writing before anything starts, and if we find a problem mid-job we stop and quote it rather than adding it to the bill. Nothing gets recommended without photo evidence you can look at yourself, and we’ll tell you plainly when a repair can safely wait a season. Call (844) 560-6330 for an exact quote. Estimates are free.
Serving Fountain, CO – Our Local Coverage Area
We serve Fountain and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Fountain
Because the obstruction is usually at the cap, not in the flue. Wind-driven prairie grit and bird nests pack into Gelco cap and spark arrestor assemblies on Fountain’s open lots, and when the wind hits a partially blocked termination the smoke has nowhere to go but into the room. We check the cap first for exactly this reason. Call (844) 560-6330 to book an inspection; estimates are free.
Yes, and often sooner than homeowners expect. A builder-installed Gelco insert that has run a couple of seasons has construction dust, debris and early creosote in the flue, and the cap has been collecting grit since day one. A first cleaning plus inspection establishes a baseline you can compare against later. Call (844) 560-6330 to schedule one.
Only if the firebox panels, baffle and damper are sound and the flue is clear. Hard freezes drive heavy, sustained burning, and that’s when spalled refractory panels and warped baffles show up. If any of those are compromised, the unit should not be burned until they’re addressed. A diagnostic inspection answers that question directly. Call (844) 560-6330 for a free estimate.
In most cases, yes. The cap and spark arrestor assembly is a separate component from the chimney structure, so a damaged or rusted cap can be replaced on its own with a quality part that fits the termination correctly. We check the frame and flue top while we’re up there to confirm nothing else needs attention. Call (844) 560-6330 to arrange it.
We work to the unit, not to a generic checklist. That means cap and spark arrestor first, then the flue, then firebox panels, baffle and damper, with OEM or exact-fit parts preferred when replacement is needed. We’re not affiliated with or authorized by Gelco, so our recommendation comes from what your fireplace needs. Cleaning, inspection and repair all happen through one company. Call (844) 560-6330 for a free estimate.
Service Areas Near Fountain
We serve homeowners across the south Colorado Springs area, including Colorado Springs, Cimarron Hills, Stratmoor and Manitou Springs. Gelco work also reaches the Fort Carson and Security-Widefield sides of the corridor, plus the Air Force Academy area. Wherever you are in the region, the service is the same: Fountain bookings run through the same scheduling as every neighboring community, and our Gelco service carries the same scope from one address to the next.
Book Your Gelco Service in Fountain Today
If your Gelco fireplace is smoking, your cap looks packed, or it’s simply been a few seasons since the flue was cleaned, book an appointment and get a free written estimate. We’ll inspect the unit, show you what we find, and tell you what can wait. Call (844) 560-6330. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Olympus Chimney Sweep.