Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Fountain, CO
We provide independent DuraFlex service throughout Fountain, from older ranch homes near the core to the newer subdivisions spreading along the east side. What sets our DuraFlex work in Fountain apart is the order we work in: on this wind-scoured stretch of the high plains, the cap and spark arrestor usually tell the story before the flue does, so we start there. Our technicians have up to 13 years of experience with flexible stainless liner systems and the components around them.
Call (844) 560-6330. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and closed Saturday. Estimates are free, and the written estimate sets the final price.
Why Fountain Residents Choose Us for DuraFlex Service
We’re an independent shop, not affiliated with or authorized by DuraFlex, and that independence is the point. We evaluate a chimney on what it’s actually doing, not on a brand checklist, and we say plainly when work can safely wait.
Our technicians work on DuraFlex flexible stainless liner systems regularly across the Pikes Peak region, so the component stack, the cap designs and the venting requirements are familiar territory. That matters here because Fountain’s housing stock runs from mid-century and 1970s-80s single-story ranches to a large wave of 2000s-2010s subdivision homes, many with factory-built fireplaces or wood stoves instead of traditional masonry. A ranch with a decades-old hearth and a newer build with a builder-installed insert ask different things of a technician, and both are routine work for us.
We keep the full job under one roof. Cleaning, inspection and repair all happen through Olympus Chimney Sweep, so a problem found during inspection gets addressed on the same call rather than handed to a second contractor. Scheduling is straightforward: tell us what the fireplace is doing, and we’ll book a sweep with a flat price agreed before we arrive.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Fountain
These are the patterns we run into most often on DuraFlex-equipped chimneys in Fountain, and each one has a local cause behind it.
- Cap and spark arrestor fouling. Fountain’s open east-side lots catch the full force of high-plains wind, and that wind drives prairie grit and bird nests straight into round-top and multi-flue caps. Once a cap packs up, draft suffers and debris starts falling into the flue. We check the cap before anything else for exactly this reason.
- Creosote glazed and cracked by freeze-thaw cycling. Hard freezes work on creosote inside a flexible liner the way they work on anything else – they crack it and curl the glaze. Wood stoves used heavily during cold snaps build that layer fast, and a cracked glaze is harder to sweep clean than a soft one.
- Liner joint and seam separation. Repeated thermal cycling plus constant wind vibration can loosen the joints between liner sections. On factory-built fireplaces common to newer Fountain subdivisions, that shows up as poor draft and leakage at the seams.
- Seized dampers and spalled fireboxes. Many 2000s-era subdivision homes with DuraFlex-equipped inserts have dampers that seize and fireboxes that spall, especially where moisture intrusion has had time to work. Heavy seasonal use speeds both along.
- Debris loading behind a cap that looked fine from the ground. Wind-blown grit doesn’t only sit on top. It sifts into the gap around a cap and settles at the first section of flue, which is why a cleaning that skips the cap rarely solves the draft complaint.
DuraFlex Service in Fountain: What Local Conditions Mean for Your Equipment
Here’s the thing that shapes DuraFlex work in Fountain more than anything else: the open east-side lots take the brunt of the high-plains wind, so cap and spark arrestor fouling with prairie grit and bird nests is often the first problem found – before anyone looks up the flue – on homes along the 80817 corridor. That changes the diagnostic order. A generic sweep goes straight to the brush. We start at the top.
Freeze-thaw is the second half of the story. Cold winters with hard freezes and persistent wind give chimneys a hard seasonal cycle: heavy fireplace use through the cold snaps, then wind-driven debris and moisture working on the cap and the liner joints in between. A flexible liner that’s sound but glazed beyond a normal sweep reads very differently from one that’s cracked or separated, and the local climate is what pushes a system toward the second category faster than homeowners expect. Getting the cap and spark arrestor checked before each heating season is the simplest thing a Fountain homeowner can do to slow all of it down.
DuraFlex Models & Products We Service in Fountain
We service the DuraFlex product types that show up in Fountain homes: Reline Kits, which are stainless flexible liner systems used to bring a flue up to a proper venting path; Pro Series chimney liners; Insulated Flexible Liner; and Round Top Caps and Multi-Flue Caps. The cap and damper work is where most local calls start, and it’s where parts quality shows fastest.
For liners, caps and dampers we use DuraFlex OEM or equivalent-listed stainless components. Generic aftermarket caps are a poor bet under Fountain’s wind load – they deform, seal badly and foul sooner. Repair is usually the right call on a sound DuraFlex system with a localized cap or damper problem. Full liner replacement only comes up when the flexible liner is cracked, separated or heavily glazed beyond what cleaning can reach.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Fountain
Every job is priced per job by a written estimate, and the estimate is free. The ranges below are typical for the work, not a quote for your chimney. The written estimate you receive is the final price.
| Service | Typical Estimated Range |
|---|---|
| Chimney sweep with a DuraFlex cap and spark arrestor check | $180 – $340 |
| Level 2 inspection (camera inspection, photo report included) | $250 – $450 |
| DuraFlex round-top or multi-flue cap replacement | $250 – $600 |
| Damper repair or replacement on a factory-built insert | $200 – $500 |
| DuraFlex flexible liner replacement | $2,000 – $5,000 |
What drives cost is straightforward: whether the cap needs re-seating or replacing, how much glazed creosote the flue is carrying, and whether the liner itself is sound. A free estimate includes the sweep findings and a camera inspection with photos, so you’re looking at the same evidence we are. Call (844) 560-6330 for an exact quote – estimates are free.
Serving Fountain, CO – Our Local Coverage Area
We serve Fountain and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Fountain
Fountain’s high-plains wind packs prairie grit and bird nests into DuraFlex round-top and multi-flue caps, and the constant load also works on the cap’s seating and fasteners over time. Once a cap is packed or loose, draft drops and debris starts dropping into the flue. Call (844) 560-6330 to book a cap check and sweep.
Hard freezes crack and curl the creosote glaze inside a flexible liner, which is why it looks fractured rather than smooth after a cold season. Heavy wood-burning through cold snaps builds that glaze faster, and cracked glaze holds onto the liner instead of brushing away cleanly. Call (844) 560-6330 for an exact quote – estimates are free.
Yes. A factory-built fireplace with a DuraFlex liner still accumulates creosote and still takes wind-driven grit through the cap, and builder-installed inserts commonly arrive at their first cleaning with a seized damper or a spalled firebox. Annual cleaning plus a cap check catches those while they’re still minor.
A Level 1 inspection is a visual assessment of the accessible parts – cap, firebox, damper, flue as far as it can be seen – while a Level 2 adds a camera inspection of the full flue and a photo report of what it finds. A Level 2 is what we recommend on a DuraFlex system when there’s a draft complaint, a joint concern or a change of appliance. Nothing is recommended without camera evidence you can see for yourself.
Usually, yes. If the flexible liner is sound and the problem is a fouled, deformed or badly seated cap, we re-seat or replace the cap alone. Liner replacement comes up only when the camera inspection shows cracking, separation or glazing beyond cleaning.
Service Areas Near Fountain
We also serve homeowners in Colorado Springs, Cimarron Hills, Stratmoor and Manitou Springs, and our DuraFlex work extends to Security-Widefield and Fort Carson. If you’re just outside Fountain, call and we’ll confirm coverage for your address. You can also read more about our DuraFlex work or about Fountain service.
Book Your DuraFlex Service in Fountain Today
Cap fouling, cracked creosote glaze, a damper that won’t move – tell us what the fireplace is doing and we’ll book a sweep with a flat price agreed before we arrive. The estimate is free, and we’ll tell you honestly when work can wait.
Call (844) 560-6330. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Olympus Chimney Sweep.