Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Manitou Springs, CO
We provide independent DuraFlex service across Manitou Springs, and what sets our DuraFlex work apart here is the housing stock itself: most of it is century-old masonry built into a canyon, where a liner has to fit a flue that was never made to standard. We clean, inspect, and repair DuraFlex stainless liner systems with quality parts that fit them, and we’re not affiliated with or endorsed by the manufacturer. Call (844) 560-6330. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Manitou Springs Residents Choose Us for DuraFlex Service
We know DuraFlex systems as an independent shop, which means we understand how the components go together and how a flexible stainless liner behaves inside a historic masonry chimney at 6,400 feet. That matters in Manitou Springs, where a flue can run tall and crooked through stone or brick that has been settling since the Victorian era.
Our technicians have up to 13 years of experience, and we work from a product portfolio that includes DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. When an inspection turns up a compromised liner, we can reline it with a DuraFlex flexible stainless system rather than hand you a referral. When the flue is sound but the crown is failing, HeatShield resurfacing restores it. Found during inspection, fixed on the same call.
Scheduling is straightforward. You tell us what the fireplace is doing, we book the visit, and the assessment tells us what the chimney needs. Call (844) 560-6330 for a free estimate.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Manitou Springs
- Seam corrosion from acidic creosote and moisture. Wet snows and repeated freeze-thaw cycles push moisture into the flue, and acidic creosote sits against the liner seams. Cleaning removes the fuel; the inspection tells us whether the seams have already started to go.
- Degraded insulation in insulated DuraFlex liners. Water gets in through a damaged crown or failed flashing, and wind-driven storms off the foothills make that worse. Once the insulation is waterlogged, draft drops and creosote builds faster.
- Dents, kinks, and mechanical damage. Narrow, steep-canyon flues leave little room, and improper sweeping or falling debris can deform the liner wall. We hand-sweep fragile historic stacks for exactly this reason.
- Liner separation or misalignment at joints. Tall, unlined historic chimneys can leave a liner under-supported, and joints shift. An inspection finds it before it becomes a venting problem.
- Low-clearance conflicts in the historic core. Many Manitou Springs chimneys were built tight against neighboring walls with almost no clearance, so installation often needs specialized low-clearance techniques or exterior routing to meet code without touching the facade.
DuraFlex Service in Manitou Springs: What Local Conditions Mean for Your Equipment
Here’s the local reality that shapes every DuraFlex job in Manitou Springs: the historic core is packed with chimneys built with minimal clearance against neighboring walls, often less than the modern 2-inch requirement. That isn’t a cosmetic detail. It changes how a flexible liner is routed, how it’s supported through a tall run, and whether the installation can stay inside the chase at all. On the steep canyon lots and narrow streets of the historic core, ladder access is frequently impossible, so technicians rig from the roofs and work against wind gusts funneling down the Pikes Peak foothills. Many old chimneys sit hard against the next building, with almost no clearance to work in. All of that means a DuraFlex installation here has to be planned around the structure rather than forced into it, sometimes with specialized low-clearance techniques or exterior routing to satisfy safety codes while leaving the historic facade untouched. It’s the difference between a liner that vents correctly for years and one that fails inspection the first time it’s checked.
DuraFlex Models & Products We Service in Manitou Springs
We work on the DuraFlex lineup as independent professionals: the SW smooth-wall stainless liner, the Pro insulated liner, the Flex corrugated liner, and the Direct Vent system for gas appliances. Each behaves differently in a Manitou Springs flue. Smooth-wall cleans down more easily. Insulated liners need their wrap kept dry. Corrugated liners demand care during sweeping because the ridges catch a brush. Direct Vent serves gas appliances and has its own venting rules.
For critical connections and transitions we recommend OEM DuraFlex components so the safety and warranty path stays intact. For non-structural items like caps and clamps, quality aftermarket parts are acceptable when OEM availability is limited. We’ll tell you plainly when a liner is structurally sound and only needs a localized repair, because repair beats replacement when it’s honest.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Manitou Springs
Every price is set per job by a written estimate, and the estimate is free. What drives the number is the flue, not a flat rate: the height and configuration of the run, whether access requires roof rigging on a steep canyon lot, the condition of the crown and flashing, and whether the job is a clean-and-inspect or a reline. A Level 2 inspection, creosote removal, and cap installation each carry their own scope. You’ll see the line items before any work begins, and we’ll say plainly when something can safely wait. Call (844) 560-6330 for a free estimate.
Serving Manitou Springs, CO – Our Local Coverage Area
We serve Manitou Springs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Manitou Springs
Often it can be cleaned and reused, but only a Level 2 inspection can tell you for certain. Decades of freeze-thaw and acidic creosote can corrode seams or waterlog the insulation, and sometimes only a section needs replacing. Call (844) 560-6330 for an exact quote. Estimates are free.
The cycle drives moisture into the flue and pulls it back out as ice, and that repeated stress is what corrodes seams and degrades insulation. Wet snows and temperature swings at this elevation make it worse, so the crown and flashing need to stay sealed. Call (844) 560-6330 for an exact quote. Estimates are free.
Yes, in most cases. The constraint is clearance, and many historic chimneys sit tight against neighboring walls, so we use low-clearance techniques or exterior routing to meet safety codes while leaving the facade intact. Call (844) 560-6330 for an exact quote. Estimates are free.
The size follows the appliance’s venting requirements and the flue’s actual dimensions, which is why we measure rather than guess. An insert needs a liner matched to its collar and the chimney’s height and configuration. Call (844) 560-6330 for an exact quote. Estimates are free.
Yes, there are DuraFlex-compatible caps built for exposed, windy installations, and a properly anchored cap is what keeps rain, debris, and downdrafts out of the flue. Wind funneling down the Pikes Peak foothills is hard on anything loosely fitted. Call (844) 560-6330 for an exact quote. Estimates are free.
Service Areas Near Manitou Springs
We serve Manitou Springs and the surrounding foothills communities, including Colorado Springs, Cimarron Hills, Stratmoor, Security-Widefield, and the Air Force Academy area. If you’re not sure whether your address falls in our coverage, call and we’ll tell you.
Book Your DuraFlex Service in Manitou Springs Today
Whether your fireplace is backdrafting or your last inspection raised a question about the liner, we’ll assess it and give you a clear written estimate at no cost. Call (844) 560-6330. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Olympus Chimney Sweep.